Bsc Preferred AHB112A Pipe Heating Cable 84W 12 Feet

Product Description

The BSC PREFERRED AHB112A is a 12-foot automatic pipe heating cable designed to protect water pipes from freezing in cold ambient conditions. The cable delivers 7 watts per foot for a total output of 84 watts (0.70 amps). A surface-mounted, snap-action thermostat is built into the assembly and activates the heating element only when temperatures drop to a level that requires heat, preventing unnecessary power draw during warmer periods. Suitable for use on both plastic and metal pipe, this cable is UL and CSA listed for recognized safety compliance. HVAC technicians and plumbers install this type of heat cable in residential and light commercial applications where pipe freeze protection is required.

The AHB112A is well-suited for residential and light commercial pipe freeze protection on water supply lines, drain lines, and similar plumbing runs exposed to unheated spaces such as crawlspaces, attics, exterior walls, and unheated mechanical rooms. The 12-foot length accommodates a single run of pipe or wraps around shorter sections for additional protection. The automatic thermostat eliminates the need for manual switching, making it practical for locations that are not regularly monitored.

Key Features

• Automatic snap-action thermostat activates heat only when needed, reducing energy use
• 7 watts per foot output over a 12-foot length for a total of 84 watts
• Compatible with both plastic and metal pipe surfaces
• UL and CSA listed for safety compliance
• Self-contained design requires no external thermostat or controller

Compatibility

Designed as a self-regulating freeze-protection heating cable for use on plastic or metal water pipe in residential and light commercial installations.

Installation Notes

Installation is typically performed by a licensed plumber or HVAC technician. Before installation, shut off power at the circuit breaker serving the outlet or circuit to which the cable will be connected. The cable should be applied directly to the pipe surface and secured with the appropriate tape or fasteners rated for heat cable use. Do not overlap the cable on itself during installation, as concentrated heat buildup can damage the cable or the pipe.