Bryant Electric 30302D Motor Disconnect Switch 30A 600V

Product Description

The BRYANT ELECTRIC 30302D is a non-fused, double-pole motor disconnect switch rated at 30 amps and 600 volts AC. Housed in a NEMA 3R enclosure, it is built for industrial-grade applications where a reliable means of disconnecting motor loads from power is required. The toggle-style actuator provides a clear ON/OFF indication. Side wiring is the only accepted wiring method for this unit. Licensed electricians and industrial maintenance technicians are the primary installers. The black enclosure finish and screw mounting hardware are included as delivered.

The 30302D is suited for commercial and light industrial settings where a weather-resistant motor disconnect is needed at or near the equipment. NEMA 3R rating makes it appropriate for outdoor or semi-protected indoor locations exposed to rain, sleet, and external ice formation. It serves as a local disconnect point for single-phase or two-wire motor branch circuits in compliance with NEC motor disconnect requirements. This switch belongs to the Non-Fused series, meaning overcurrent protection must be provided upstream by a separately rated fuse or breaker.

Key Features

• 30A, 600V AC rating handles a wide range of motor disconnect applications
• Double-pole configuration interrupts both conductors simultaneously
• NEMA 3R enclosure provides rain and sleet protection for outdoor or exposed installations
• Non-fused design allows flexibility in upstream overcurrent protection selection
• Side-wired construction simplifies conduit entry and conductor termination
• Screw mounting hardware included for direct surface or wall installation

Compatibility

Designed as an OEM-style industrial motor disconnect switch for use in commercial and light industrial branch-circuit motor disconnect applications requiring a double-pole, 30A, 600V AC non-fused enclosed switch.

Installation Notes

Installation must be performed by a qualified licensed electrician in accordance with the National Electrical Code (NEC) and all applicable local codes. De-energize and lock out the upstream circuit before beginning any wiring work. This unit accepts side wiring only - do not attempt to use alternative wiring entry points. Verify that upstream overcurrent protection is correctly sized, as this is a non-fused switch and provides no internal fault protection.