Brady Spc Sorbents SPC510 Oil Only Sorbent Boom 5in 10ft 32gal

Product Description

The BRADY SPC SORBENTS SPC510 is an oil-only sorbent boom designed to contain and absorb petroleum-based liquids on water or hard surfaces. With a 5-inch diameter and 10-foot overall length, each unit delivers up to 32 gallons of absorption capacity per package of four booms. The white color indicates oil-only construction, meaning the sorbent media repels water while selectively absorbing oils, fuels, lubricants, and other hydrocarbons. This boom is built for rapid spill response in industrial, marine, and facility maintenance environments where fast containment is essential.

The SPC510 is suited for use around fueling docks, machine shop floors, waterways, drainage channels, and secondary containment areas where petroleum spills occur. Facilities maintenance crews, environmental response teams, and industrial technicians use these booms to encircle spills, deploy along shorelines, or place at drain inlets. Each package contains four 10-foot booms, providing 40 total linear feet of containment per order unit. The oil-only formulation makes these booms appropriate wherever water is present and selective absorption is required.

Key Features

• Oil-only absorption - repels water, selectively absorbs hydrocarbons including fuels, oils, and lubricants
• 5-inch diameter provides substantial cross-section for effective containment barriers
• 10-foot length per boom allows flexible deployment and easy linking for larger perimeters
• 32-gallon absorption capacity per package of four booms
• White color coding for quick visual identification as oil-only sorbent
• Package quantity of four booms supports site-level spill response staging

Compatibility

Designed for use as an oil-only sorbent boom in spill containment and response applications involving petroleum-based liquids on water surfaces or solid substrates.

Installation Notes

Facilities maintenance technicians and environmental health and safety personnel typically deploy these booms. No tools are required for deployment - booms can be placed by hand around the spill perimeter or connected end-to-end for longer containment runs. Ensure the boom is fully encircling the spill source before attempting recovery. Follow applicable local, state, and federal regulations for used sorbent disposal, as oil-saturated media may be classified as hazardous waste.