BONEHAM Boneham SP00003178 Drill Bushing 5/16 in Id 5/8 in Od

Boneham SP00003178 Drill Bushing 5/16 in Id 5/8 in Od

Brand: BONEHAM
SKU: SP00003178
Availability: In Stock

Ships same day if ordered by 12 pm

$15.65
$15.65
HAVE A QUESTION?

Our team is ready to help!

  • Voomi Supply

    Secure Payments

  • Voomi Supply

    Easy Returns

  • Voomi Supply

    Expert Advice

  • Voomi Supply

    Fast Shipping

Product Description

The BONEHAM SP00003178 is a press fit headless drill bushing designed to guide drill bits with precision in jig and fixture applications. Manufactured from steel with a hardness rating of 60 to 65 HRC, this bushing resists wear under repeated drilling cycles. It features a 5/16 inch inside diameter and a 5/8 inch body outside diameter, with an overall length of 5/8 inch. The headless design sits flush with the jig plate surface, making it suitable for applications where a flanged collar would interfere with workpiece clearance. Machinists, toolmakers, and production shop technicians install this type of bushing as a fixed, non-renewable guide in drill jigs and fixtures.

This bushing is suited for use in production drilling fixtures, tooling plates, and jig setups where consistent hole location is required across repeated operations. The press fit installation method locks the bushing permanently into the jig body without the need for locking screws or retaining hardware. It conforms to ANSI standards for drill bushings, making it a direct fit in jigs dimensioned to industry-standard specifications. Typical applications include metal fabrication shops, aerospace tooling, and general manufacturing environments requiring tight positional tolerances.

Key Features

  • Press fit installation for permanent, secure seating in jig plates
  • Hardened steel construction at 60 to 65 HRC for extended wear life
  • Headless design sits flush with jig surface for unobstructed workpiece contact
  • Inside diameter tolerance of +0.0001 to +0.0005 inches for precise drill guidance
  • Conforms to ANSI drill bushing standards
  • Non-renewable fixed bushing - intended for permanent installation

Compatibility

Designed as an OEM-style fixed drill bushing for use in standard ANSI-dimensioned drill jigs and tooling fixtures requiring a 5/16 inch inside diameter and 5/8 inch outside diameter press fit bushing.

Installation Notes

Installation is performed by toolmakers or machinist-level technicians using an arbor press or hydraulic press to seat the bushing flush and square into the jig plate bore. The receiving hole in the jig plate must be machined to the correct press fit tolerance to achieve proper retention. De-energize any powered equipment and secure the workholding fixture before pressing in the bushing. Once installed, this bushing is not intended to be removed or replaced without reworking the host bore.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Technical Specifications
Inside Diameter
5/16 inch
Inside Diameter Tolerance
+0.0001 to +0.0005 inches
Body Outside Diameter
5/8 inch
Overall Bushing Length
5/8 inch
Material
Steel
Hardness
60 to 65 HRC
Installation Method
Press Fit
Bushing Industry Code
H P
Renewable
No
Counterbored
No
Standards
ANSI
Brand
BONEHAM
Manufacturer Part Number
SP00003178
BONEHAM Boneham SP00003178 Drill Bushing 5/16 in Id 5/8 in Od

Vendor: BONEHAM

Boneham SP00003178 Drill Bushing 5/16 in Id 5/8 in Od

$15.65

Vendor: BONEHAM

Boneham SP00003178 Drill Bushing 5/16 in Id 5/8 in Od

$15.65

Related Products

Customer Support Image

Need Support?

Call Jack and His Team