Boneham AM00001119 Slip-fixed Drill Bushing Sfm

Product Description

The BONEHAM AM00001119 is a slip-fixed drill bushing conforming to the SFM industry code. It is designed to guide cutting tools such as drills, reamers, and boring tools with precision in jig plate applications. The bushing features a 9.6 mm inside diameter, a 15 mm body outside diameter, and a 36 mm length under head. The renewable design allows the bushing to be replaced independently without disturbing the jig plate, reducing downtime in production environments. Machinists, tool and die makers, and fixture builders install this component during jig assembly and maintenance operations.

This bushing is used in drilling jigs and fixture plates where repeatable hole location and tool guidance are required. The slip-fixed configuration allows for quick removal and replacement during high-volume production runs. Typical applications include multi-operation jigs where different bushing sizes must be swapped for successive machining operations. It is suited for both light and moderate production environments in metal fabrication and machining shops.

Key Features

• SFM industry code slip-fixed configuration for quick tool-change operations
• 9.6 mm inside diameter for precise drill and reamer guidance
• 15 mm body outside diameter for secure seating in the jig plate
• 36 mm length under head provides adequate tool guidance depth
• Renewable bushing design allows independent replacement without disturbing the jig

Compatibility

Designed as an OEM-style replacement or standard-fit component for drilling jigs and fixture plates requiring an SFM-type slip-fixed renewable bushing with a 9.6 mm inside diameter and 15 mm body outside diameter.

Installation Notes

Installation is performed by machinists or toolmakers during jig assembly or bushing replacement. Ensure the liner bushing in the jig plate is clean and free of chips or burrs before seating the slip-fixed bushing. Lock the bushing in place with the appropriate locking clamp or screw as required by the jig design. Always verify inside diameter clearance against the cutting tool shank diameter before use.