Bk Resources Inc. BKF-SWMPR-WB-G Pre-rinse Assembly

Product Description

The BK RESOURCES INC. BKF-SWMPR-WB-G is a heavy duty commercial pre-rinse assembly designed for high-demand foodservice sink applications. It features a single valve splash mount configuration and ships with a 44-inch stainless steel braided hose rated to 300 psi. The triple-ply hose construction handles the rigors of continuous use in commercial kitchens. A 12-inch wall bracket and integral check valve are included. Inlet connections are 1/2-inch female, and the quarter-turn ceramic disc valves provide fast, reliable flow control with long service life. The assembly is certified lead-free to ANSI/NSF 61.

This pre-rinse assembly is intended for commercial foodservice environments including restaurants, institutional kitchens, cafeterias, and food processing facilities. It mounts at the sink deck or splash zone and is typically installed by a licensed plumber during new construction or renovation of a commercial kitchen. The splash mount design keeps the valve body above the deck and within easy reach of kitchen staff. Where compatible models or system families are not specified, this unit is suited for standard commercial two- or three-compartment sink setups with 1/2-inch IPS supply connections.

Key Features

• 44-inch triple-ply stainless steel braided hose rated to 300 psi
• Single valve splash mount configuration for deck or wall installation
• Integral check valve prevents backflow contamination
• 1/2-inch female inlets for standard IPS supply connections
• Quarter-turn ceramic disc valves for quick shut-off and extended valve life
• Lead-free construction certified to ANSI/NSF 61
• 3-year manufacturer warranty

Compatibility

Designed as a heavy duty pre-rinse replacement or new-installation assembly for commercial foodservice sinks equipped with 1/2-inch IPS hot and cold supply lines. No specific model or system compatibility was stated in the product data.

Installation Notes

Installation should be performed by a licensed plumber in accordance with local plumbing codes and ANSI/NSF 61 lead-free requirements. Shut off the water supply and relieve line pressure before disconnecting any existing pre-rinse assembly or supply connections. Use thread sealant tape rated for potable water on all threaded connections. Verify that the wall bracket mounting surface can support the assembly weight and that supply line pressure does not exceed the 300 psi hose rating.