Bete Fog Nozzle 3/8NF4030@5 Fan Spray Nozzle 6.32 Gpm

Product Description

The BETE FOG NOZZLE 3/8NF4030@5 is a standard fan spray nozzle machined from 18-8 stainless steel, designed for industrial and commercial fluid-distribution applications requiring a precise, flat-fan spray pattern. It produces 6.32 gallons per minute at 100 psi through a 0.156-inch orifice, delivering a 30-degree spray angle. The 3/8-inch NPT male connection allows direct installation into standard pipe fittings without adapters. Technicians working in cooling systems, dust suppression, chemical dosing, or wash-down applications will find this nozzle suited to environments where corrosion resistance and repeatable flow performance are required.

This nozzle is appropriate for residential, commercial, and light industrial systems where a controlled fan-pattern spray is needed. Typical applications include HVAC evaporative cooling assist, pool and spa chemical injection, industrial wash-down headers, and agricultural spray systems. The stainless steel construction handles mildly corrosive fluids and outdoor environments without degradation. Flow rate scales with pressure: 2.83 GPM at 20 psi, 4.00 GPM at 40 psi, and 6.32 GPM at 100 psi, giving installers flexibility across a range of operating conditions.

Key Features

• 18-8 stainless steel construction resists corrosion in wet and chemically active environments
• 30-degree fan spray angle delivers a focused, flat spray pattern for targeted coverage
• 0.156-inch orifice diameter provides consistent, repeatable flow at rated pressure
• 3/8-inch NPT male thread connects directly to standard pipe fittings
• Flow rate scales predictably: 2.83 GPM at 20 psi, 4.00 GPM at 40 psi, 6.32 GPM at 100 psi

Compatibility

Designed for use in any system accepting a 3/8-inch NPT male spray nozzle connection where a standard fan-pattern nozzle with a 30-degree spray angle is specified.

Installation Notes

Installation is performed by a qualified plumber, pipefitter, or mechanical technician. Shut off system pressure and depressurize the line fully before removing or installing nozzles. Use appropriate thread sealant rated for the fluid being handled and torque to fitting-manufacturer specifications. Verify the spray angle and orifice size match the system design before startup.