Bete Fog Nozzle 1/8NF2090@5 Fan Nozzle 1/8 Npt Ss

Product Description

The BETE FOG NOZZLE 1/8NF2090@5 is a standard flat-fan spray nozzle machined from 18-8 stainless steel, designed to produce a wide, even fan pattern across a 90-degree spray angle. With a 0.109-inch orifice diameter and a flow rate of 3.16 gallons per minute at 100 psi, this nozzle delivers consistent, measurable liquid distribution in demanding industrial and process applications. The 1/8-inch NPT male connection makes installation straightforward on standard threaded pipe systems. It is typically installed by industrial maintenance technicians, process engineers, or specialty mechanical contractors working on spray, wash-down, or fluid distribution systems.

This nozzle is suited for applications requiring a controlled, flat-fan spray pattern, including cooling, coating, chemical treatment, dust suppression, and surface wash-down systems. The stainless steel construction resists corrosion in wet or chemically active environments. It fits 1/8-inch NPT-threaded pipe headers and manifolds commonly found in light industrial, HVAC evaporative cooling, and process equipment. Flow performance scales with line pressure: rated at 1.41 GPM at 20 psi and 2.00 GPM at 40 psi, giving installers a clear picture of output across common operating ranges.

Key Features

• 90-degree flat-fan spray angle for broad, even liquid distribution
• 3.16 GPM flow rate at 100 psi with predictable flow across pressure range
• 0.109-inch orifice diameter for consistent droplet sizing
• 18-8 stainless steel construction for corrosion resistance in wet and chemical environments
• 1/8-inch NPT male connection for direct installation on standard threaded pipe

Compatibility

Designed for use with 1/8-inch NPT-threaded pipe headers and manifolds in standard industrial spray and fluid distribution systems.

Installation Notes

This nozzle is installed by mechanical contractors or maintenance technicians on threaded pipe systems. Shut off and depressurize the line before removing or installing any nozzle. Apply appropriate thread sealant to the NPT threads and tighten with a wrench to achieve a leak-free seal without overtightening the stainless steel fitting. Verify line pressure is within the operating range expected for the target flow rate before returning the system to service.