Bete Fog Nozzle 1/8NF0530@4 Brass Fan Nozzle 30 Deg

Product Description

The BETE FOG NOZZLE 1/8NF0530@4 is a brass standard fan nozzle designed for precise flat-fan spray patterns in industrial and commercial fluid-distribution systems. Built with a 1/8 inch NPT male connection, it delivers a 30-degree spray angle and flows 0.79 gallons per minute at 100 psi through a 0.057 inch orifice diameter. The all-brass construction offers corrosion resistance in wet or chemically active environments. This nozzle is suited for spray system technicians and industrial maintenance professionals who need repeatable, low-flow fan patterns in process, cooling, or washdown applications.

This nozzle fits into spray headers, manifolds, and custom spray systems where a narrow 30-degree fan pattern is required. It is commonly installed in cooling towers, dust suppression rigs, agricultural spray bars, and industrial washdown lines. The 1/8 inch NPT male thread allows direct connection to standard pipe fittings or spray bars without adapters in most configurations. Flow rate scales predictably with pressure, making it straightforward to calculate system output at operating pressures between 20 psi and 100 psi.

Key Features

• 30-degree flat-fan spray angle for narrow, focused coverage
• 0.057 inch orifice diameter for precise, low-flow metering
• 0.79 GPM at 100 psi; 0.50 GPM at 40 psi; 0.35 GPM at 20 psi
• 1/8 inch NPT male connection threads directly into standard fittings
• All-brass construction resists corrosion in wet and process environments
• Compact, lightweight form factor at 0.01 pounds for easy integration into dense spray arrays

Compatibility

Designed as an OEM-style replacement or new-installation nozzle for 1/8 inch NPT spray systems requiring a standard fan spray pattern at low flow rates.

Installation Notes

Installation should be performed by a qualified spray system technician or pipefitter familiar with NPT threaded connections. Shut off system pressure and depressurize the line completely before removing or installing any nozzle. Apply thread sealant tape rated for the fluid being sprayed to the male NPT threads before installation, and hand-tighten before finishing with a wrench to avoid cracking the brass body. Verify system operating pressure against the nozzle flow curve to confirm intended output before returning the system to service.