Bete Fog Nozzle 1/8FWL-1/2 60@1 Low Flow Whirl Nozzle

Product Description

The BETE FOG NOZZLE 1/8FWL-1/2 60@1 is a low flow whirl nozzle manufactured from polyvinylchloride (PVC), designed to produce a hollow or full cone spray pattern at controlled flow rates. It accepts a 1/8 inch female pipe connection and delivers 0.77 gallons per minute (GPM) at 100 psi. The 60-degree spray angle and 0.055 inch orifice diameter make it well suited for precise, low-volume liquid distribution in industrial process, cooling, chemical dosing, and spray system applications. Installation and maintenance are typically handled by process technicians, mechanical contractors, or plumbing professionals.

This nozzle is used in applications where low flow rates and a controlled spray angle are required. Typical installations include misting systems, chemical treatment lines, industrial spray headers, and process cooling setups. The PVC construction provides resistance to many common chemicals and corrosive fluids, making it a practical choice for wet chemical environments. The 1/8 inch female pipe thread allows direct connection to standard NPT-threaded pipe or fittings without adapters in most configurations.

Key Features

• Low flow output: 0.77 GPM at 100 psi, 0.50 GPM at 40 psi, and 0.36 GPM at 20 psi
• 60-degree spray angle for targeted, controlled coverage
• 0.055 inch orifice diameter for precise flow restriction
• PVC construction resists corrosion and chemical attack
• 1/8 inch female pipe connection for standard NPT installation

Compatibility

Designed as an OEM-style replacement or new-installation nozzle for 1/8 inch female NPT-threaded spray systems requiring low flow rates and a 60-degree spray angle.

Installation Notes

Installation is typically performed by a licensed plumber or qualified mechanical technician. Shut off system pressure completely before removing or installing nozzles. Use thread sealant or PTFE tape appropriate for PVC fittings and the fluid being handled. Do not overtighten threaded connections into PVC fittings, as the material can crack under excessive torque.