Benjamin Moore RP2710092-01 Rubber Base Pool Paint White Satin

Product Description

The BENJAMIN MOORE RP2710092-01 is a rubber base pool paint from the Insl-X RP Series, formulated for coating new or old concrete swimming pools. This satin-finish coating delivers durable protection in both residential and commercial pool environments. It resists fading, fungus, algae, abrasion, and alkalis, making it a practical choice for pools exposed to demanding water chemistry and UV conditions. Coverage runs approximately 450 square feet per gallon. The formula complies with Ozone Transport Commission volatile emission standards at less than 340 grams per liter, meeting regional air quality requirements where applicable.

This pool paint is designed for use on concrete, Gunnite, and Marcite pool surfaces where the substrate is sound and solid. It performs in both fresh water and salt water pools. The product is not suitable for metal, fiberglass, vinyl-lined pools, hot tubs, or spas. It is applied in residential and commercial settings by pool service professionals and painting contractors familiar with pool surface preparation and chemical cure requirements.

Key Features

• Rubber base formula bonds to new or old concrete pool surfaces
• Satin finish resists fading, fungus, algae, abrasion, and alkalis
• Compatible with fresh water and salt water pools
• Covers approximately 450 square feet per gallon
• Sets to touch in 30 minutes; recoat in 24 hours
• Meets Ozone Transport Commission VOC standards at less than 340 grams per liter

Compatibility

Suitable for use on concrete, Gunnite, and Marcite pool surfaces in residential and commercial pools. Do not apply to metal, fiberglass, vinyl-lined pools, hot tubs, or spas. Gunnite and Marcite surfaces must be structurally sound and solid prior to application.

Installation Notes

Application should be performed by a qualified pool service professional or licensed painting contractor following all local codes and the Insl-X swimming pool paint application instructions. Power wash and prepare the pool surface thoroughly before applying; the substrate must be clean, dry, and free of loose material. Allow the coating to cure fully before filling: 7 days for outdoor pools and 14 days for indoor pools. When adding pool chemicals for the first treatment, dilute them before introducing to the pool to protect the fresh coating.