Belden Inc. CAF1209020 CAT6 Patch Cable Cmr White 20ft

Product Description

The BELDEN INC. CAF1209020 is a CAT6 patch cable wired to the T568A standard, rated CMR (Communications Multipurpose Cable, Riser) for in-wall and riser-rated installations. At 20 feet in length, it delivers structured cabling connectivity for data networks in commercial and residential environments. The CMR rating meets fire-resistance requirements for vertical runs between floors, making it suitable for use inside conduit or open plenum-adjacent pathways where a riser-rated jacket is specified. Licensed low-voltage technicians, IT cabling contractors, and electricians performing structured wiring work are the primary installers of this cable.

This patch cable is designed for horizontal or short-run vertical connections between network equipment such as patch panels, switches, routers, and workstation outlets. The T568A wiring configuration is commonly specified in government and certain commercial installations per TIA-568 structured cabling standards. At 20 feet, it covers typical rack-to-rack or panel-to-device runs without requiring a field-terminated solution. It is suited for both new construction pulls and retrofit network upgrades in commercial office, education, and light industrial environments.

Key Features

• CAT6 performance rating supporting Gigabit Ethernet and 10GBase-T applications at appropriate channel lengths
• T568A wiring standard for compliance with TIA-568 structured cabling specifications
• CMR (Riser) jacket rating for fire-code-compliant vertical and in-wall cable runs
• White jacket for easy identification and color-coded cable management
• 20-foot length suits rack, panel, and equipment room patch runs without field termination
• Factory-terminated construction ensures consistent electrical performance and eliminates field-termination variability

Compatibility

Designed as an OEM-style patch cable for use with standard CAT6 and CAT6E patch panels, keystone jacks, and RJ45 network ports in structured cabling systems.

Installation Notes

Installation should be performed by a licensed low-voltage cabling technician or electrician familiar with TIA-568 structured cabling standards and applicable local fire and building codes. CMR-rated cables must be installed in compliance with NEC Article 800 riser requirements. Avoid sharp bends below the minimum bend radius and do not staple or crush the cable jacket, as deformation affects transmission performance. Verify T568A termination continuity at both ends before commissioning the link.