Belden Inc. 1794A 0101000 75 Ohm Sdi Coax Series 7

Product Description

The BELDEN INC. 1794A 0101000 is a 75 ohm Serial Digital Interface (SDI) coaxial cable built to Series 7 standards with a 16 AWG solid center conductor. Designed for high-definition and standard-definition video signal transmission, this cable maintains tight impedance control at 75 ohms to preserve signal integrity across broadcast, production, and AV infrastructure installations. The solid 16 AWG conductor supports low-resistance signal paths suited for longer cable runs where attenuation must be minimized. Installation is handled by licensed electricians, low-voltage contractors, and AV systems integrators working in broadcast facilities, production environments, and commercial AV systems.

This coaxial cable is appropriate for SDI video distribution in environments requiring reliable 75 ohm impedance matching, including broadcast studios, post-production facilities, and commercial AV installations. It is suited for runs where a solid-core conductor is specified to reduce signal loss. The Series 7 designation identifies it within the Belden SDI cable family designed for demanding video infrastructure applications.

Key Features

• 75 ohm characteristic impedance for SDI video signal transmission
• 16 AWG solid center conductor for low attenuation on longer runs
• Series 7 construction meeting broadcast-grade coaxial cable standards
• Sold per unit (each) for flexible quantity ordering

Compatibility

Designed as an SDI coaxial cable for use in 75 ohm video distribution systems requiring Series 7 rated coaxial construction. Consult system design documentation to confirm suitability for specific signal formats and run lengths.

Installation Notes

Installation should be performed by a licensed electrician or qualified low-voltage contractor in accordance with applicable NEC Article 820 requirements for coaxial cable wiring. De-energize connected equipment before terminating cable ends. Use the appropriate coaxial compression or BNC crimp connectors rated for the cable diameter and impedance. Avoid sharp bends below the minimum bend radius to prevent impedance discontinuities and signal degradation.