Belden Inc. 10GXW53 0091000 Cat6a Plenum Cable 1000 Ft

Product Description

The BELDEN INC. 10GXW53 0091000 is a Category 6A plenum-rated, 4-pair, 23 AWG unshielded twisted pair (UTP) data cable designed for high-speed structured cabling installations. Supplied on a 1000-foot reel in white, this cable meets the CMP plenum burn rating required for air-handling spaces and return-air plenums in commercial buildings. It supports 10 Gigabit Ethernet applications and is suited for horizontal runs in data centers, office environments, and institutional facilities. Licensed low-voltage cabling contractors and network infrastructure technicians are the primary installers.

This cable is used in horizontal cabling segments within structured wiring systems that must comply with plenum-space fire codes. Typical applications include above-ceiling and raised-floor runs in commercial offices, hospitals, schools, and data centers where CMP-rated cable is required by the National Electrical Code. The 1000-foot reel format is standard for pull-through installations between telecommunications rooms and work-area outlets.

Key Features

• Category 6A performance supporting 10 Gigabit Ethernet up to 100 meters
• CMP plenum rating for use in air-handling spaces per NEC Article 800
• 4-pair, 23 AWG solid copper construction
• 1000-foot reel for full horizontal-run installations
• White jacket for identification in mixed-cable environments

Compatibility

Designed for use in Cat6A-rated structured cabling systems terminating to Cat6A keystone jacks, patch panels, and modular outlets that accept 23 AWG solid UTP conductors.

Installation Notes

Installation should be performed by a licensed low-voltage or datacom cabling contractor in accordance with ANSI/TIA-568 standards and local NEC requirements. De-energize any adjacent electrical systems before working in shared plenum spaces. Maintain minimum bend radius during pulls to avoid degrading cable geometry and transmission performance. Do not exceed the cable's rated pulling tension, and avoid stapling or over-cinching cable ties, which can deform the pairs and reduce Cat6A performance margins.