Belden 1392P 010Z250 Multimedia Composite Cable

Product Description

The Belden 1392P 010Z250 is a multimedia composite cable combining two conductor configurations in a single jacket: a 2-conductor 22 AWG foil-shielded pair and a 2-conductor 18 AWG unshielded pair, finished in black. This construction allows AV and low-voltage systems installers to run signal and power in one pull, reducing conduit fill and labor time. The shielded pair handles audio or control signals where noise rejection matters, while the heavier 18 AWG conductors carry low-voltage power or secondary signal runs. It is sold in a 250-foot spool, suited for structured media, commercial AV distribution, and building automation applications.

This cable is commonly used in commercial and residential multimedia installations where combined signal and power runs are required in a single pathway. Typical applications include audio distribution systems, intercom wiring, low-voltage lighting control, and building automation panel feeds. AV integrators, low-voltage technicians, and licensed electricians working within structured cabling or multimedia system scopes are the primary installers. The black jacket is suitable for in-wall or conduit runs where a neutral finish is required.

Key Features

• Composite design combines 2-conductor 22 AWG shielded pair and 2-conductor 18 AWG pair in one cable
• Foil shield on the 22 AWG pair provides EMI and RFI noise rejection for signal integrity
• 18 AWG conductors support low-voltage power or secondary signal distribution
• Black outer jacket suits in-wall, plenum-adjacent, and conduit installations requiring a neutral finish
• 250-foot spool length reduces field splicing and simplifies inventory management
• Single-cable pull for mixed signal and power runs lowers installation labor and conduit fill

Compatibility

Designed for use in multimedia, AV distribution, intercom, and low-voltage control wiring applications where a composite 22 AWG shielded plus 18 AWG conductor cable is specified.

Installation Notes

Installation should be performed by a licensed low-voltage technician or electrician in accordance with applicable NEC article requirements for the cable type and installation environment. De-energize all circuits at the panel before terminating conductors. Maintain minimum bend radius per the manufacturer data sheet to avoid compromising the foil shield continuity. Verify local code requirements for plenum versus riser ratings before routing through air-handling spaces.