Associated Spring Raymond 206-632 Die Spring 8in Extra Strong

Product Description

The ASSOCIATED SPRING RAYMOND 206-632 is a heavy-duty die spring engineered for use in metal stamping dies, punch presses, and related tooling applications. Rated Extra Strong and color-coded yellow for quick duty identification, it features a 32.00 mm hole diameter, a 16.00 mm rod diameter, and an 8-inch (203.00 mm) free length. The trapezoidal wire cross-section provides a higher load capacity than round-wire springs of comparable size. With a maximum deflection load of 3876.00 N and a maximum deflection of 51.00 mm, this spring is built to handle aggressive press cycles in production environments. Toolmakers and die maintenance technicians are the primary installers.

This die spring is suited for installation in compression die sets used across a range of metal fabrication operations, including blanking, forming, bending, and drawing dies. The yellow Extra Strong duty rating places it in the upper load range of the ISO 10243 color-coding system. It is commonly used where stroke requirements are moderate and spring forces must remain consistent over high cycle counts. The 16.00 mm rod diameter and 32.00 mm hole diameter must be matched precisely to the die set housing to ensure proper guidance and prevent buckling under load.

Key Features

• Extra Strong duty rating with yellow color-code per ISO 10243 standard
• Trapezoidal wire shape delivers higher load density than round-wire alternatives
• 32.00 mm hole diameter and 16.00 mm rod diameter for guided installation in standard die sets
• Maximum deflection load of 3876.00 N with 51.00 mm maximum deflection travel
• Chromium alloy steel construction for fatigue resistance in high-cycle tooling
• 8-inch (203.00 mm) free length suits medium-stroke die applications

Compatibility

Designed as an ISO 10243-compliant Extra Strong die spring for use in standard guided die sets requiring a 32.00 mm hole diameter and 16.00 mm rod diameter.

Installation Notes

Die springs of this type are installed by toolmakers or tool-and-die technicians during die build or maintenance. Always ensure the mounting pocket diameter and rod diameter match the spring specifications before installation to prevent lateral loading and premature failure. Compress only to the specified maximum deflection of 51.00 mm and never compress to solid unless the application is specifically engineered for that condition. Follow all applicable shop safety procedures and press lockout protocols when servicing tooling in a press.