Associated Spring Raymond 206-414 Die Spring Yellow

Product Description

The ASSOCIATED SPRING RAYMOND 206-414 is an extra-strong die spring engineered for high-load tooling and stamping applications. It features a 20.00 mm hole diameter, a 10.00 mm rod diameter, and a free length of 3-1/2 inches (89.00 mm). Wound from chromium alloy steel with a trapezoidal wire shape, this spring delivers a maximum deflection load of 1529.00 N across a maximum deflection of 22.00 mm. The yellow color coding identifies it as an extra-strong duty rating per ISO 10243 standards. Toolmakers, die setters, and precision fabrication professionals select this spring for demanding press and mold environments.

This die spring is suited for use in stamping dies, injection molds, progressive dies, and other precision tooling assemblies where consistent force and controlled deflection are critical. The extra-strong duty rating makes it appropriate for high-cycle applications that require reliable spring return under significant compressive loads. It is commonly installed in both OEM tooling builds and in-service die maintenance programs across metal fabrication and plastics processing operations.

Key Features

• Extra-strong duty rating for high-load tooling and stamping applications
• Trapezoidal wire cross-section provides higher load capacity compared to round wire at equivalent size
• Chromium alloy steel construction for durability under repeated compression cycles
• Yellow color coding for quick identification per ISO 10243 die spring standards
• Spring rate of 396.86 N/mm for predictable, consistent force delivery
• Manufactured under ISO 9001:2008 and ISO/TS 16949:2009 certified quality systems

Compatibility

Designed as a standard ISO 10243 die spring replacement for extra-strong duty applications requiring a 20.00 mm hole diameter and 10.00 mm rod diameter with a 3-1/2 inch free length.

Installation Notes

Installation should be performed by qualified toolmakers or die maintenance technicians with the press or mold in a fully de-energized and locked-out state. Ensure the rod and bore dimensions match the 10.00 mm rod diameter and 20.00 mm hole diameter before fitment. Springs should seat squarely in the pocket with no lateral binding. Replace springs in matched sets when possible to maintain balanced load distribution across the die.