Associated Spring Raymond 206-206 Die Spring 1-1/2 in

Product Description

The ASSOCIATED SPRING RAYMOND 206-206 is a heavy-duty die spring rated for extra strong duty service in precision tooling and stamping applications. It features a 12.50 mm hole diameter, a 6.30 mm rod diameter, and a free length of 1-1/2 inches (38.00 mm). The trapezoidal wire shape and chromium alloy steel construction deliver consistent force output and long cycle life under high-load conditions. Maximum deflection load is 342.00 N at 9.50 mm of travel to solid, making this spring well suited for demanding press tool environments. Tool and die makers, maintenance mechanics, and machine builders are the typical installers.

This die spring is designed for use in stamping dies, injection molds, metal forming presses, and similar industrial tooling applications where a compact, high-load compression spring is required. The yellow color coding indicates extra strong duty per ISO 10243, allowing quick visual identification during die assembly or maintenance. Its small profile suits tight die sets where space between the rod and housing is limited.

Key Features

• Extra strong duty rating per ISO 10243 standard
• Trapezoidal wire cross-section for higher load capacity in a compact envelope
• Chromium alloy steel construction for fatigue resistance under repeated cycling
• Yellow color coding for fast visual duty-rating identification
• 12.50 mm hole diameter and 6.30 mm rod diameter for precise fit on standard die rods
• 342.00 N maximum deflection load at 9.50 mm travel to solid

Compatibility

Designed as an ISO 10243-compliant extra strong duty die spring for use in standard die sets, stamping tools, and forming fixtures that accept a 12.50 mm hole diameter and 6.30 mm rod diameter spring with a 1-1/2 inch free length.

Installation Notes

Installation is typically performed by tool and die makers or maintenance mechanics during die assembly or spring replacement. Always relieve all press pressure and lock out or tag out the press before accessing the die set. Ensure the guide rod and housing bore are clean and within the specified diameter tolerances before seating the spring. Do not compress the spring beyond the rated travel to solid, as bottoming the spring will reduce service life.