Associated Spring Raymond 106-712 Die Spring Extra Heavy-duty

Product Description

The ASSOCIATED SPRING RAYMOND 106-712 is an extra heavy-duty die spring designed for high-load tooling and stamping die applications. It features a trapezoidal wire shape that maximizes load capacity within a compact envelope. With a maximum deflection load of 1,734 pounds and a spring rate of 2,550 pounds per inch, this spring delivers consistent, repeatable force under demanding cycle conditions. Manufactured from chromium alloy steel, it is built to resist fatigue and deformation in press tooling environments. Installation and replacement are handled by tool and die makers or maintenance technicians in industrial settings.

This die spring is suited for use in stamping dies, punch presses, and other precision tooling fixtures that require reliable compression force. The green color coding identifies it as an extra heavy-duty rating, following standard die spring load classification conventions. Its 1.5-inch hole diameter and 0.75-inch rod diameter make it compatible with standard die set configurations requiring those bore and rod dimensions. A free length of 3 inches provides the working travel needed for typical press stroke applications.

Key Features

• Extra heavy-duty duty rating with 1,734 lb maximum deflection load
• Spring rate of 2,550 lb per inch for consistent, predictable force output
• Trapezoidal wire cross-section maximizes load capacity relative to spring size
• Chromium alloy steel construction for fatigue resistance under high-cycle conditions
• Green color coding per standard die spring duty-rating identification
• Manufactured under ISO 9001:2008 and ISO/TS 16949:2009 certified quality systems

Compatibility

Designed for use in compression die spring applications requiring a 1.5-inch hole diameter, 0.75-inch rod diameter, and 3-inch free length in extra heavy-duty service.

Installation Notes

Die springs are installed and serviced by tool and die makers or qualified maintenance personnel. Always de-energize and lock out the press before removing or replacing springs in a die set. Inspect the mating rod and bore dimensions to confirm proper fit before installation. Do not compress the spring beyond the rated maximum deflection of 0.75 inches to avoid permanent set or premature failure.