Ashcroft 95426XLL Pressure Gauge 0-200 Psi 2.5 in Dial

Product Description

The ASHCROFT 95426XLL is a dry, analog pressure gauge designed for accurate pressure measurement in plumbing, HVAC, and industrial piping systems. It features a 2.5-inch dial, a center back mount configuration, and a 0 to 200 psi range with 1% of scale accuracy. The stainless steel case provides corrosion resistance in demanding environments, while the bronze wetted parts make it suitable for a wide range of common media. This gauge is installed by licensed plumbers, HVAC technicians, and pipefitters requiring reliable, readable pressure indication at a panel or manifold.

The 95426XLL is suited for residential and light commercial applications where a compact, back-mount gauge is required at a fixed monitoring point. Typical installations include boiler systems, compressed air lines, water supply systems, and chilled or condenser water circuits. The 1/4-inch NPT center back connection allows direct mounting to a pipe tee, valve, or manifold port. No liquid fill is used, keeping the installation straightforward and the gauge lightweight.

Key Features

• 0 to 200 psi pressure range with 1% of scale accuracy
• 2.5-inch analog dial for clear, at-a-glance reading
• Center back mount with 1/4-inch NPT thread for direct panel or pipe installation
• Stainless steel case resists corrosion in wet or humid environments
• Bronze wetted parts compatible with a broad range of common system media
• Dry gauge construction — no liquid filler required

Compatibility

Designed as an OEM-style replacement or new-installation pressure gauge for residential and commercial systems requiring a 1/4-inch NPT center back mount gauge with a 0 to 200 psi range.

Installation Notes

Installation is typically performed by a licensed plumber or HVAC technician. Shut off system pressure and depressurize the line before removing or installing the gauge. Apply thread sealant tape or compound to the NPT threads in accordance with applicable IPC or IFGC requirements. Do not over-tighten the gauge body, as this can damage the threaded socket or the bourdon tube internals.