Ashcroft 94230XLL Pressure Gauge 0-1000 Psi 2.5in Dial

Product Description

The ASHCROFT 94230XLL is an industrial pressure gauge designed for accurate pressure monitoring in demanding service environments. It features a 2.5-inch analog dial with a 0 to 1000 psi range and delivers 1% of full-scale accuracy. The Bourdon tube and all wetted parts are constructed from 316 stainless steel, while the case is 304/316 stainless steel, making this gauge suitable for corrosive media and harsh ambient conditions. The polycarbonate lens protects the dial from impact and moisture. This gauge is not liquid-filled and uses a lower mount configuration with a 1/4-inch MNPT male threaded connection. Licensed HVAC technicians, plumbers, and industrial service professionals install this type of instrument where reliable pressure readings are critical.

The ASHCROFT 94230XLL is suited for industrial pressure measurement applications including process piping, hydraulic systems, compressed air lines, and fluid handling systems. Its stainless steel construction makes it appropriate for use with mildly corrosive liquids and gases. The lower mount orientation allows direct inline installation on pipes, manifolds, or test ports. Its certifications under CRN, IP54, IP65/NEMA 4, PED, and RoHS standards indicate suitability for use in environments where moisture ingress protection and regulatory compliance are required.

Key Features

• 0 to 1000 psi pressure range with 1% of full-scale accuracy
• 2.5-inch analog dial for clear, at-a-glance pressure reading
• 316 stainless steel Bourdon tube and wetted parts for corrosion resistance
• 304/316 stainless steel case for durable, long-term field service
• Lower mount, 1/4-inch MNPT connection for direct pipe installation
• Non-liquid-filled design; polycarbonate lens for impact and moisture protection
• Certified to CRN, IP54, IP65/NEMA 4, PED, and RoHS standards

Compatibility

Designed as an OEM-style replacement or direct-install industrial pressure gauge for systems requiring a 1/4-inch MNPT lower mount connection and a 0 to 1000 psi measurement range.

Installation Notes

Installation should be performed by a qualified plumber, pipefitter, or instrumentation technician. Isolate and depressurize the system fully before removing or installing any pressure gauge. Apply thread sealant or PTFE tape to the MNPT threads as required by local codes, and avoid over-tightening which can damage the threaded socket or gauge body. Verify the process media is compatible with stainless steel wetted parts before placing the gauge in service.