Arrowhead Brass 361LF 3/4 Inch Hose Bibb Lead Free Vacuum Breaker

Product Description

The ARROWHEAD BRASS PLUMBING 361LF is a lead-free red brass hose bibb designed for residential and light commercial outdoor water supply applications. It features a 3/4-inch Male Iron Pipe (MIP) inlet and a 3/4-inch hose thread outlet, with a no-kink design that protects the hose connection under load. An integral vacuum breaker is built in, providing backflow prevention at the point of use. The lead-free construction meets current drinking water standards. This fitting is intended for installation by licensed plumbers and experienced pipefitters working on potable water systems.

The 361LF is suited for exterior wall-mount hose bib installations in residential and light commercial buildings where a threaded iron pipe supply connection is present. The integral vacuum breaker makes it appropriate for installations where code requires backflow protection at hose outlets, including connections near irrigation equipment, utility sinks, or any location where hose-end backflow is a concern. It ships in a package quantity of 12 units, making it practical for contractors stocking multiple fixtures on a job.

Key Features

• Lead-free red brass construction meets current potable water compliance requirements
• Integral vacuum breaker provides built-in backflow prevention at the hose outlet
• No-kink hose connection design reduces stress on attached hoses
• 3/4-inch MIP inlet threads directly onto standard iron pipe or compatible fittings
• Asset 1011 and IAMPO listed for code-compliant installations
• Packaged in quantities of 12 for contractor convenience

Compatibility

Designed as an OEM-style replacement or new-installation hose bibb for residential and light commercial potable water supply systems with a 3/4-inch Male Iron Pipe supply connection.

Installation Notes

Installation should be performed by a licensed plumber in accordance with the International Plumbing Code (IPC) and applicable local amendments. Shut off the water supply and depressurize the line before making any threaded connections. Apply an appropriate thread sealant or PTFE tape to the MIP threads before installation. Do not over-tighten the brass fitting against dissimilar metals to avoid galling or cracking.