Apollo Powerpress 7481650 Carbon Steel Press Tee 1/2 in

Product Description

The APOLLO POWERPRESS 7481650 is a 1/2 inch carbon steel press tee designed for permanent branch connections in press-fit gas piping systems. Configured as Press x Press x Press, it joins three runs of pipe without open flame, threading, or solvents. The fitting is precision-formed from gas-rated carbon steel for dimensional accuracy and structural integrity under service pressure. At 0.5 pounds and compact overall dimensions, it handles easily in tight mechanical spaces. Licensed plumbers and pipefitters install this fitting using compatible press tooling. It is suited for commercial and residential gas distribution where code-compliant, leak-tested connections are required.

This tee is intended for use in gas piping applications using carbon steel press-fit systems. It is well-suited for branch takeoffs in residential and light commercial gas distribution lines serving appliances such as boilers, furnaces, water heaters, and unit heaters. The Press x Press x Press end configuration allows the fitting to connect three pipe runs simultaneously in a single crimp operation, reducing labor time compared to threaded or welded alternatives. All three ports are sized at 1/2 inch, making this a straight tee with no reducing connections.

Key Features

• Gas-rated carbon steel construction for strength and durability in fuel gas service
• Press x Press x Press end style — all three ports accept press-fit connection, no flame or threading required
• All ports sized at 1/2 inch for equal-flow branch connections
• Precision-formed dimensions support consistent seating with compatible press tooling and fittings
• Compact profile at 2.72 x 4.11 x 1.26 inches fits in confined mechanical spaces
• Lightweight at 0.5 pounds for easy single-hand positioning during installation

Compatibility

Designed as an OEM-style press-fit replacement fitting for 1/2 inch carbon steel gas piping systems using press-fit tooling and fittings compatible with the APOLLO POWERPRESS product family.

Installation Notes

Installation must be performed by a licensed plumber or pipefitter in accordance with applicable gas codes, including IFGC requirements. Shut off and verify the absence of gas pressure in the line before cutting or fitting any pipe. Use only compatible press tooling and jaws rated for carbon steel gas fittings — do not attempt to crimp with tooling not approved for this fitting series. After installation, perform a pressure test and leak check per local code before returning the system to service.