Ansell N862 Nitrile Gloves 6.7 Mil Medium Powder-free 50 Pack

Product Description

The ANSELL N862 is a disposable nitrile examination and general-purpose glove from the Microflex Integra series. Constructed from uncoated nitrile at 6.7 mil thickness, it delivers a firm tactile barrier suited for medical, laboratory, and industrial service environments. The full-grain texture across the palm and fingers supports grip on both dry and lightly oily surfaces. At 9.5 inches in length with a rolled cuff, the glove provides forearm coverage appropriate for tasks where splash or contamination exposure is a concern. Each glove is powder-free and ambidextrous, which simplifies donning during high-volume service calls. Sold in packs of 50, the N862 is used by HVAC technicians, plumbers, electricians, and pool service professionals who require a medical-grade hand barrier during chemical handling, inspection, or maintenance work.

The N862 is appropriate for both light industrial and medical-adjacent applications. It carries FDA 21 CFR 177.2600 clearance and meets US QSR/FDA 510(k) requirements, making it suitable for environments where food-contact or medical-grade standards apply. The glove conforms to ASTM D6319 for nitrile examination gloves and EN 420:2003+A1:2009 for general protective glove design. Trade professionals typically deploy this glove when handling refrigerants, drain treatments, solvents, pool chemicals, flux, or other contact-hazard materials during routine service work. The medium size and ambidextrous fit allow facilities managers and service companies to stock a single size across mixed crews.

Key Features

• 6.7 mil nitrile construction with a nominal palm thickness of 6.5 mil for consistent barrier protection
• Full-grain texture on palm and fingers for improved grip on tools and wet surfaces
• Powder-free design reduces contamination risk and skin irritation during extended wear
• Ambidextrous fit with rolled cuff simplifies donning and reduces glove waste per job
• 9.5-inch length with regular rolled cuff for added forearm coverage
• Meets ASTM D6319, EN 420:2003+A1:2009, FDA 21 CFR 177.2600, and US QSR/FDA 510(k) standards
• Acceptable Quality Level (AQL) of 1.5 for reliable defect-rate control

Compatibility

Designed as a general-purpose disposable nitrile glove suitable for medical, laboratory, and light industrial applications where a powder-free, examination-grade hand barrier is required.

Installation Notes

Inspect each glove for tears or pinholes before donning, particularly when handling caustic chemicals or refrigerants. Dispose of gloves after single use and do not reuse or wash nitrile disposables. Store the pack away from direct sunlight, ozone sources, and heat to preserve nitrile integrity. Follow applicable OSHA personal protective equipment guidelines and any site-specific PPE protocols when selecting glove type for a given task.