Ansell 208000 Nitrile-coated Work Gloves Interlock Knit Pair

Product Description

The ANSELL 208000 is a general purpose work glove built on a cotton interlock knit construction with a full nitrile coating. The nitrile coating provides a smooth grip surface and full finger coverage, making the glove suitable for a wide range of light-duty handling tasks. The slip-on knit cuff and wing thumb design allow for a natural fit during repetitive motion work. At 0.1 pounds per pair, the glove is lightweight enough for extended wear without adding bulk. It carries an ANSI/ISEA Abrasion Resistance Level 3 rating and meets CE CAT II standards, giving supervisors and techs a documented performance baseline for PPE compliance programs.

These gloves are designed for assembly and inspection environments, parts delivery to production lines, loading and unloading of rough parts or boxes, final assembly operations, and general shipping and receiving work. The static dissipative construction makes them appropriate in areas where electrostatic discharge is a concern. They are sold as a single pair and are sized for unisex fit across a range of hand sizes commonly found in trade and light industrial settings.

Key Features

• Full nitrile coating with smooth grip surface for consistent contact on parts and components
• ANSI/ISEA Abrasion Resistance Level 3 rating for documented PPE compliance
• Static dissipative construction suitable for ESD-sensitive work areas
• Wing thumb design reduces seam stress at a high-wear contact point
• Slip-on knit cuff for quick donning and doffing during high-turnover tasks
• Maximum rated use temperature of 104 degrees F

Compatibility

Designed as a general purpose PPE glove for light industrial, assembly, and logistics applications where an ANSI/ISEA A1 cut level and abrasion resistance are required baseline specifications.

Installation Notes

Inspect gloves before each use for tears, punctures, or coating separation that would compromise protection. Replace immediately if the nitrile coating shows cracking or delamination. Follow your facility PPE program and applicable OSHA 29 CFR 1910.138 personal protective equipment requirements when selecting and deploying hand protection. Do not use these gloves for tasks requiring chemical immersion resistance or cut levels above A1.