Ampco S-38 Slotted Screwdriver Non-sparking 1/4 in

Product Description

The AMPCO S-38 is a non-sparking slotted screwdriver built for trade professionals working in environments where ignition risk is a concern - refineries, chemical plants, gas utilities, and other classified or hazardous locations. The blade measures 4 inches in length and 1/4 inch in width, with a blade thickness of 0.25 inches. The round shank seats in a contoured acetate handle that is 3.5 inches long and 1 inch in diameter, bringing overall length to 7-5/8 inches. AMPCO non-sparking tools are a recognized standard in facilities where ferrous tools are prohibited by safety protocol.

The S-38 is suited for fastener work in oil and gas, petrochemical, mining, grain handling, munitions, and other facilities where a spark from a conventional steel tool could trigger a fire or explosion. It handles standard slotted fasteners encountered in panel work, equipment maintenance, and general service. The compact 4-inch blade gives enough reach for recessed fasteners while keeping the overall tool length manageable in confined spaces.

Key Features

• Non-sparking construction for safe use in hazardous and classified locations
• 1/4 inch blade width with standard slotted tip geometry
• 4 inch blade length with 0.25 inch blade thickness for firm slot engagement
• Round shank design for consistent torque transfer
• Acetate handle, 3.5 inches long and 1 inch in diameter, for grip comfort and chemical resistance
• Non-magnetic - will not attract ferrous debris or affect sensitive instrumentation

Compatibility

Designed as a standard-tip slotted screwdriver for use with conventional slotted fasteners in hazardous-location and industrial maintenance applications where non-sparking tools are required by site safety standards.

Installation Notes

Use of non-sparking tools in classified areas should comply with facility safety plans, OSHA 29 CFR 1910, and applicable NFPA standards. Confirm the fastener slot size matches the 1/4 inch blade width before applying torque to avoid cam-out or fastener damage. Inspect the blade tip for deformation before each use. Non-sparking tools are not a substitute for full lockout/tagout procedures - de-energize and depressurize equipment per site protocol before performing fastener work.