Amerimax Home Products 2800700120 K-style Galvanized Steel Gutter

Product Description

The AMERIMAX HOME PRODUCTS 2800700120 is a K-style galvanized steel gutter section designed for residential and light commercial rainwater management. Manufactured from mill finish galvanized steel at 0.015 inches thick, this gutter section measures 5 inches wide by 10 feet long. The K-style profile offers a flat back for flush fascia mounting and a decorative ogee face that increases structural rigidity compared to half-round profiles. Licensed contractors and experienced installers use this section as part of continuous gutter runs on sloped rooflines. The mill finish galvanized surface provides baseline corrosion resistance and accepts paint for finished installations.

This gutter section is suited for residential homes, light commercial buildings, and agricultural structures where reliable roof drainage is required. The 5-inch K-style size is one of the most common gutter widths used in standard residential construction across most climate zones. Each section is 10 feet long and can be cut to length on site. Sections are joined using standard K-style gutter connectors and sealed at joints before mounting. This product is sold in a package of 10 sections, providing 100 linear feet of coverage per package.

Key Features

• K-style profile provides a flat back for direct fascia attachment and added rigidity
• Mill finish galvanized steel construction offers corrosion resistance and paintability
• 0.015-inch material thickness suitable for standard residential drainage loads
• 5-inch width handles typical roof drainage volumes for residential slopes
• 10-foot section length allows flexible layout and on-site cutting
• Sold in a package of 10 sections for 100 linear feet of total coverage

Compatibility

Designed as a standard OEM-style replacement or new-installation section compatible with 5-inch K-style galvanized steel gutter systems using standard connectors, end caps, and hangers sized for 5-inch K-style profiles.

Installation Notes

Gutter installation is typically performed by roofing or exterior contractors following local building codes and manufacturer guidelines. Sections should be mounted with appropriate pitch toward downspouts, generally 0.25 inches of drop per 10 feet of run, using gutter hangers spaced per local code requirements. Use tin snips or a gutter cutting tool for on-site trimming, and apply gutter sealant to all joints and end caps before fastening. Avoid over-bending the profile during handling, as deformation at the joint area can compromise the seal.