Amax Lighting LED-V36-BLK-MV 30W 36in Led Vanity Light

Product Description

The AMAX LIGHTING INC LED-V36-BLK-MV is a 36-inch LED vanity light bar built for commercial and residential bathroom applications where multi-voltage compatibility is required. Rated at 30 watts and 3000K color temperature, this fixture operates on 120 to 277 volts, making it suitable for installations fed from either standard residential circuits or commercial multi-wire branch circuits. The black steel back plate pairs with polycarbonate end caps and a milky white lens for a clean, diffused light output. Licensed electricians and finish contractors are the typical installers for this fixture type.

This fixture is designed for vanity and bath bar installations in hotels, multi-family residential units, and single-family homes. The 36-inch form factor suits standard mirror widths above bathroom vanities. The unit is linkable to additional fixtures, and 1/2-inch knockouts accept Romex wiring connectors, supporting straightforward rough-in wiring on standard circuits. The 120-volt supply leg is dimmable, which is a useful feature in residential master bath and hospitality settings where lighting control is required.

Key Features

• Multi-voltage operation: 120 to 277 volts for residential and commercial use
• 30W LED source with 3000K warm white color temperature
• Milky white lens for diffused, even light distribution
• Linkable design allows multiple fixtures to be joined in a single run
• 1/2-inch knockouts accept Romex wiring connectors for clean rough-in
• Black powder-coat finish steel back plate with polycarbonate end caps
• Dimmable on 120-volt circuits

Compatibility

Designed as a direct-wire LED vanity bar for standard residential and commercial bathroom installations requiring a 36-inch fixture with multi-voltage capability.

Installation Notes

Installation should be performed by a licensed electrician in accordance with NEC Article 410 and local amendments. Shut off the circuit breaker feeding the vanity circuit before any wiring work. When linking multiple fixtures, verify the total wattage load stays within the branch circuit rating. Dimmable operation on 120-volt circuits requires a compatible LED dimmer switch rated for the connected load.