Amax Lighting 5CCT-JR2BN Led Flush Mount 20W 1700lm Brushed Nickel

Product Description

The AMAX LIGHTING INC 5CCT-JR2BN is a 14-inch LED flush mount ceiling fixture rated at 20 watts and 1700 lumens, operating on 120 volts. A built-in DIP switch lets the installer select from five color temperatures - 2700K, 3000K, 3500K, 4000K, or 5000K - without changing any hardware. The cold-rolled steel housing uses a die-form construction for rigidity, and the brushed nickel finish suits a wide range of interior aesthetics. This fixture is dimmable and rated for damp locations, making it suitable for bathrooms, laundry rooms, and covered entryways as well as standard living spaces. Licensed electricians or qualified installers handle the final connection.

This flush mount is designed for residential ceiling applications where low-profile lighting is required. The selectable CCT feature makes it practical across multiple room types - kitchens, bedrooms, hallways, and utility spaces - without stocking separate SKUs for warm or cool white. The damp location rating extends its use to bathrooms and similar environments. A plastic white diffuser provides even light distribution across the 14-inch diameter face. The double-ring design adds visual depth to the fixture profile.

Key Features

• Five selectable color temperatures (2700K, 3000K, 3500K, 4000K, 5000K) via DIP switch
• 20W LED output delivering 1700 lumens on 120 volts
• Dimmable - compatible with standard leading-edge and trailing-edge dimmers (verify dimmer compatibility before install)
• Damp location rated for bathrooms, laundry rooms, and covered exterior entryways
• Die-form cold-rolled steel housing with brushed nickel finish
• Plastic white diffuser with double-ring aesthetic detail

Compatibility

Designed as a direct-wire flush mount ceiling fixture for standard residential junction boxes. Verify junction box load rating before installation.

Installation Notes

Installation should be performed by a licensed electrician in accordance with NEC Article 410 and applicable local codes. Shut off the branch circuit breaker and verify the circuit is de-energized with a non-contact voltage tester before wiring. Confirm the mounting junction box is rated for the fixture weight of 5 pounds. If a dimmer is used, verify the dimmer is rated for LED loads and follow the dimmer manufacturer's minimum-load requirements.