Allpoints Ek 032S Liquid Line Filter Drier 1/4 Inch Odf

Product Description

The ALLPOINTS EK 032S is a liquid line filter drier designed to remove moisture, acid, and contaminants from refrigerant systems. Sourced under the Parker Gold Label specification, this unit features a 1/4 inch ODF solder connection and is compatible with all commercially available refrigerants. At 0.4 pounds, it is a compact inline component that installs in the liquid line between the condenser and the metering device. HVAC and refrigeration technicians install this part during system commissioning, compressor replacement, or any time the refrigerant circuit has been opened and contamination risk exists.

This filter drier is suited for residential and light commercial refrigeration and air conditioning applications. It is installed in the liquid line to protect the metering device and compressor from moisture and particulate contamination. The 1/4 inch ODF solder connection makes it compatible with standard copper tubing used in small refrigeration circuits, window units, mini-splits, and similar low-tonnage equipment.

Key Features

• 1/4 inch ODF solder connection for standard copper liquid line installation
• Parker Gold Label specification for moisture and acid removal performance
• Compatible with all commercially available refrigerants including HFCs and HCFCs
• Compact form factor at 0.4 pounds for tight equipment spaces
• Single-unit packaging for individual service calls

Compatibility

Compatible with all commercially available refrigerants. Designed as an OEM-style liquid line filter drier replacement for small refrigeration and air conditioning systems using 1/4 inch ODF solder connections.

Installation Notes

Installation should be performed by a licensed HVAC or refrigeration technician holding an EPA Section 608 certification. Recover all refrigerant and depressurize the system before cutting into the liquid line. Flow direction must be observed when soldering the drier in line. After installation, evacuate the system to the required micron level before recharging with refrigerant.