Aervoe 216 Red Marking Chalk Spray 15 Oz Temporary

Product Description

The AERVOE 216 is a water-based marking chalk in a 15 oz aerosol can, formulated for temporary upside-down surface marking. Unlike diluted alternatives, this is a true water-based formula using non-resin binders and low pigment solids in a slurry that dries quickly and holds the mark until water, traffic, or abrasion removes it. The 216 is engineered for field use by utility crews, construction workers, surveyors, landscapers, and athletic field staff who need a fast, temporary reference mark that disappears cleanly without chemical residue or surface damage.

The 216 is designed for temporary marking on most paved surfaces, soil, and grass. Typical applications include utility locating, construction layout, surveying benchmarks, landscaping boundaries, and athletic field marking. It is packaged to operate inverted by hand or inside an Aervoe Spot Marker 244 or Marking Stick 245 applicator, with or without the cap installed. For best spray results, apply from 3 to 4 inches for freehand writing or 5 to 8 inches when using an applicator for a consistent 3/4-inch line. Optimal performance occurs between 50 degrees F and 90 degrees F. This product is not recommended for aisle striping, parking lots, or traffic lines, which require Aervoe Striping Paint, or for golf course marking, which calls for Aervoe Water-Based Marking Paint.

Key Features

• True water-based formula, not a diluted water-added cost-reduction blend
• Fast-drying chalk mark disappears naturally with water, traffic, or surface abrasion
• Can operates inverted for upside-down aerosol marking by hand or in Aervoe 244/245 applicators
• Safe on all surfaces including pavement, soil, and grass at construction, utility, and survey sites
• Compatible with conventional air spray systems or airless pressure sprayers for bulk application
• Tamper-resistant cap with activator bar for applicator compatibility

Compatibility

Designed for use by hand or with the Aervoe Spot Marker 244 and Marking Stick 245 applicators. Compatible with conventional air spray systems and airless pressure sprayers for bulk application scenarios.

Installation Notes

Shake the can well before use and for 1 to 2 minutes after the agitator ball is heard. Keep the can in motion during application to prevent puddling and agitate periodically throughout use. After each use, clear paint from the valve and tip by turning the can upright and spraying for 3 to 5 seconds. No special licensing is required for this product, but follow all site-specific safety and utility marking protocols applicable to your trade and jurisdiction.

Technical Specifications

• Color: Red
• Container Size: 20 oz
• Net Weight: 15 oz
• Formula Type: True water-based, non-resin binder
• Mark Type: Temporary, removable by water or abrasion
• Application Temperature Range: 50 degrees F to 90 degrees F
• Spray Distance (Freehand): 3 to 4 inches from surface
• Spray Distance (Applicator): 5 to 8 inches for 3/4-inch line
• Applicator Compatibility: Aervoe 244 Spot Marker, Aervoe 245 Marking Stick

Standard Information

• Brand: AERVOE
• Manufacturer Part Number: 216