Aci 103728 Pendant Control Station Momentary 2NO 600vac

Product Description

The ACI 103728 is a pendant-mount control station designed for industrial and commercial applications where operators need hands-on, momentary switching control at the point of operation. It features two pushbutton operators with booted head covers that protect against dust, moisture, and accidental actuation. The station is wired for a 2NO (normally open) contact configuration and carries a 16-amp rating at up to 600 volts AC. Mechanical interlocking is built in. Licensed electricians and industrial maintenance technicians are the primary installers for this type of control hardware.

This pendant control station is suited for use with overhead hoists, cranes, conveyors, and similar electrically operated machinery where the operator needs to control motion or function from a suspended, handheld enclosure. The momentary switch action means contacts close only while the pushbutton is actively depressed and return to the open state on release, which is the standard requirement for hoist up/down, jog, and similar directional control circuits. It ships as a single unit at a package quantity of one.

Key Features

• Momentary switch action for precise, operator-controlled contact closure
• 2NO contact configuration supports standard two-circuit control wiring
• Booted head operators provide mechanical protection for each pushbutton
• Mechanical interlock style built into the station assembly
• Rated 16 amps at 600 volts AC for compatibility with industrial control circuits
• Pendant-mount form factor keeps the operator interface at point of use

Compatibility

Designed as an OEM-style replacement or new-installation pendant control station for industrial hoist, crane, and conveyor control systems requiring momentary 2NO pushbutton operators rated at 600 volts AC.

Installation Notes

Installation should be performed by a licensed electrician in accordance with applicable NEC requirements for industrial control wiring. De-energize and lock out the control circuit before connecting or disconnecting the pendant station. Verify that the supply circuit voltage and amperage do not exceed the station ratings of 600 volts AC and 16 amps. Inspect the booted head operators for integrity after installation to confirm environmental protection is maintained.