Accurate Bushing MCRV-90 Stud Cam Follower 90mm Roller

Product Description

The ACCURATE BUSHING MCRV-90 is a stud-type cam follower bearing designed for linear and contoured track applications in industrial machinery. Built from carbon steel, this follower features a 90mm roller diameter and 35mm roller width, riding on a 30mm stud diameter with a 63mm stud length and 100mm overall length. The M30x1.5 threaded stud with a 32mm thread length allows direct mounting into a tapped bore without a housing. A dynamic load capacity of 60,000 N and a static load capacity of 142,000 N make it suitable for demanding cam, track, and guide roller applications. Mechanical maintenance technicians and machine builders are the typical installers.

This cam follower is suited for use in automated production equipment, conveyor systems, indexing tables, and press tooling where a stud-mounted roller is required to follow a hardened track or cam surface. The coarse thread pitch of M30x1.5 provides positive retention under vibration and cyclic load. Both light-duty positioning systems and higher-load linear guide applications fall within its rated capacity range. The carbon steel construction is appropriate for dry or lightly lubricated industrial environments.

Key Features

• 90mm roller diameter and 35mm roller width for broad track contact
• 30mm stud diameter with M30x1.5 thread and 32mm thread engagement length
• 63mm stud length and 100mm overall length for standard mounting depth
• 60,000 N dynamic load capacity and 142,000 N static load capacity
• Carbon steel construction for strength in industrial environments
• Stud-mount design eliminates need for a separate housing or bracket

Compatibility

Designed as a stud-type cam follower replacement for industrial machinery using M30x1.5 stud-mount cam follower bearings with a 90mm roller diameter.

Installation Notes

Installation is performed by mechanical maintenance technicians or machine builders. Ensure the mating tapped bore is clean and dimensioned for an M30x1.5 thread before installation. De-energize and lock out all machine power and release any stored mechanical energy before servicing cam follower components. Do not exceed the rated dynamic or static load capacities, and verify that the track or cam surface hardness is appropriate for the roller material.