Accupro ACC-LT500 Single Point Carbide Tool Bit Lh

Product Description

The ACCUPRO ACC-LT500 is a left-hand, LT-style single point tool bit designed for turning operations on metal lathes and turning centers. Built with a micrograin solid carbide tip, it delivers fine-grain cutting performance suited to finishing passes and precision stock removal. The shank measures 1/2 inch wide by 1/2 inch tall, and the tool runs 6 inches overall length. Machinists and tool-and-die professionals reach for this bit when tight tolerances and consistent chip control are priorities. The micrograin carbide grade supports harder workpiece materials where standard carbide may chatter or wear prematurely.

The ACC-LT500 is intended for left-hand turning applications on manual and CNC lathes in machine shop environments, production turning cells, and toolroom settings. Its LT industry-standard geometry means it fits toolholders and boring bars designed around the LT-500 specification, simplifying replacement sourcing. Typical use cases include OD turning, facing on left-hand feed paths, and contour work where a left-hand cutting direction is required by the setup.

Key Features

• Micrograin solid carbide tip for improved edge retention on hard materials
• Left-hand cutting direction for lathe setups requiring reverse feed or left-to-right passes
• LT-style geometry conforming to industry standard LT-500
• 1/2 inch by 1/2 inch square shank for secure seating in standard toolholders
• 6-inch overall length provides rigidity and adequate overhang clearance

Compatibility

Designed as an OEM-style replacement or direct-fit tool bit for LT-500 industry-standard toolholders and boring bar setups requiring a 1/2 inch square shank, left-hand turning configuration.

Installation Notes

Installation is performed by machinists or toolroom technicians. Before seating the bit, power down and lock out the lathe spindle per your facility lockout/tagout procedure. Ensure the toolholder pocket is clean and free of chips before inserting the shank. Set tool height to center using a reference gauge rather than estimating by eye, as off-center height on a carbide-tipped bit accelerates edge chipping.