Accupro 95168814 Corner Radius End Mill 3/4 in 5 Flute

Product Description

The ACCUPRO 95168814 is a solid carbide corner radius end mill designed for high-performance milling in demanding machining environments. It features a 3/4 inch diameter with a 0.0600 inch corner radius, a 3-1/4 inch length of cut, and a 6 inch overall length. The five-flute geometry improves chip evacuation and feed rates compared to standard four-flute tools. An AlTiN coating provides high-temperature resistance and extended tool life when cutting hardened steels, stainless alloys, and other abrasive materials. This tool is intended for use by machinists and CNC operators on vertical machining centers and milling machines.

This end mill suits production and job-shop environments requiring long-reach milling, finishing passes, or profiling operations in ferrous and non-ferrous materials. The corner radius geometry reduces stress concentration at the cutting edge compared to a sharp corner, making it appropriate for semi-finish and finish milling of pockets, slots, and contoured surfaces. The 3/4 inch shank diameter matches standard ER and side-lock toolholders common to most VMC and HMC setups.

Key Features

• Solid carbide micrograin substrate for rigidity and edge retention in hard materials
• AlTiN coating improves heat resistance and reduces built-up edge in dry or near-dry cutting
• 0.0600 inch corner radius reduces edge chipping and improves surface finish on profiled features
• Five-flute design supports higher feed rates and better surface finishes than four-flute alternatives
• 45-degree helix angle promotes smooth chip flow and reduces cutting forces
• Single-end, centercutting configuration allows plunge entry and ramping operations
• Long-reach geometry with 3-1/4 inch LOC enables deep pocket and extended-reach applications

Compatibility

Designed as an OEM-style replacement or direct-purchase solid carbide corner radius end mill suitable for standard 3/4 inch toolholders on CNC vertical and horizontal machining centers.

Installation Notes

Installation should be performed by a qualified machinist or CNC operator. Secure the shank in a clean, properly torqued toolholder to the machine manufacturer's specified clamping procedure before spindle engagement. Inspect the cutting edges for chips or coating damage before each use. Follow shop-specific feeds, speeds, and depth-of-cut parameters appropriate for the workpiece material and machine rigidity.