Accupro 95168564 Corner Radius End Mill 1/4 in 6 Flute

Product Description

The ACCUPRO 95168564 is a solid carbide corner radius end mill designed for high-performance milling in metalworking and machining applications. It features a 1/4-inch diameter with a 0.0100-inch corner radius and six flutes, delivering smooth, accurate cuts with reduced chipping at the cutting edge. The AlTiN coating provides thermal resistance and extended tool life when cutting ferrous metals, alloys, and hardened steels. At 2-1/2 inches overall length with a 3/4-inch length of cut, this single-end, centercutting tool is sized for a broad range of slotting, profiling, and finishing operations. Machinists and CNC operators install this tool in standard 1/4-inch collets or tool holders.

This end mill is suited for use in CNC machining centers and manual mills across job shops, tool rooms, and production environments. The right-hand cutting direction and right-hand flute spiral make it compatible with conventional milling setups. Its micrograin carbide substrate and AlTiN coating make it particularly effective when machining stainless steel, titanium, and other high-temp alloys where heat generation is a concern. The centercutting geometry allows plunge milling as well as peripheral cuts, adding versatility to its application range.

Key Features

• 1/4-inch mill diameter with 0.0100-inch corner radius for edge strength and surface finish
• Six-flute design increases feed rate capability and surface finish quality
• AlTiN coating resists heat and abrasion for extended tool life in hard and high-temp materials
• Solid micrograin carbide substrate provides rigidity and dimensional stability
• Centercutting geometry enables both plunge and peripheral milling operations
• 25-degree helix angle balances chip evacuation with cutting force

Compatibility

Designed as an OEM-style replacement and standard tooling option for CNC machining centers and manual mills accepting 1/4-inch shank end mills in standard collet or end mill holder systems.

Installation Notes

This tool is installed by machinists or CNC setup technicians using a 1/4-inch precision collet or shrink-fit holder rated for the intended RPM and feed conditions. Ensure the spindle is fully stopped and the machine is in a safe state before changing tooling. Verify shank seating depth and runout with a dial indicator before production cuts. Follow machine manufacturer and shop safety protocols for tooling torque and clamping.