Accupro 75536623 Carbide Turning Insert CCMT09T304

Product Description

The ACCUPRO 75536623 is a CCMT-style carbide turning insert designed for precision external turning operations on CNC and manual lathes. Classified under ANSI code CCMT32.51 and ISO code CCMT09T304, this insert features an 80-degree diamond (rhombic) shape with a positive side clearance and a 7-degree relief angle. The PVD-coated ACM35P carbide grade delivers a balance of moderate wear resistance and toughness, making it well suited for interrupted and continuous cuts in steel and stainless steel workpieces. The WM+ chip breaker geometry supports reliable chip control across a range of feed rates and depths. Licensed machinists and CNC operators are the primary installers of this insert.

This insert is applied in turning centers and engine lathes where a neutral-hand, screw-lock CCMT insert is specified. Typical applications include finish to semi-finish turning of carbon steel and stainless steel components. The maximum depth of cut is 3.00 mm (0.1181 inches), making it appropriate for light to moderate stock removal. It is commonly used in job shops, production machining environments, and maintenance facilities handling a variety of workpiece materials coded P and M under ISO classification.

Key Features

• CCMT insert style with 80-degree diamond shape for strong cutting edge geometry
• PVD-coated ACM35P carbide grade optimized for steel (P) and stainless steel (M) applications
• WM+ chip breaker for controlled chip formation during turning operations
• Positive side clearance reduces cutting forces and heat generation at the workpiece
• Screw-lock insert holding method for secure, repeatable seating in the toolholder pocket
• Neutral hand orientation compatible with both left- and right-hand turning setups

Compatibility

Designed as an OEM-style replacement turning insert for toolholders accepting CCMT32.51 (ANSI) or CCMT09T304 (ISO) style inserts with a screw-lock holding method and positive clearance geometry.

Installation Notes

Installation is performed by qualified machinists or CNC tooling technicians. Power down and de-energize the machine spindle before indexing or replacing inserts. Use the appropriate torx or hex key to seat the clamping screw to the toolholder manufacturer's specified torque range -- do not overtighten, as this can fracture the carbide insert. Inspect the insert pocket and seating surface for chips or debris before installing a new insert to ensure accurate seating and consistent tool offset repeatability.