Accupro 75496869 Snma Turning Insert Solid Carbide Cvd

Product Description

The ACCUPRO 75496869 is a solid carbide SNMA-style turning insert designed for precision metal cutting on CNC lathes and turning centers. It carries the ACK20P manufacturer grade with a CVD coating for improved wear resistance and heat tolerance during high-speed or interrupted cuts. The insert features a 90-degree included angle, a square shape (ANSI code SNMA432), and a 0.0315-inch (0.80 mm) corner radius. With 8 cutting edges per insert and an EN chip breaker geometry, it is suited for machinists and tooling specialists running production turning operations on ferrous and non-ferrous materials.

This insert is used in turning applications where a neutral-hand, square-profile insert is required. The SNMA style with a clamp, lever lock, pin, or screw holding method makes it compatible with a wide range of standard insert toolholders used in production and job-shop environments. Typical applications include OD turning, facing, and light profiling in both roughing and semi-finish operations. It is sold individually with a minimum order quantity of 10 units.

Key Features

• Solid carbide substrate with CVD coating for extended tool life and thermal resistance
• 8 usable cutting edges per insert for reduced per-edge tooling cost
• EN chip breaker geometry for effective chip control during turning operations
• Neutral hand orientation for use in right- or left-hand toolholder setups
• 0.1890-inch (4.80 mm) maximum depth of cut supports a range of material removal rates
• ANSI code SNMA432 for straightforward toolholder matching

Compatibility

Designed as an OEM-style replacement turning insert for standard SNMA-style toolholders conforming to ANSI code SNMA432.

Installation Notes

Installation is performed by qualified machinists or tooling technicians. Power down and lock out the machine before seating or replacing inserts. Use the appropriate clamping method supported by the toolholder - clamp, lever lock, pin, or screw - and ensure the insert seats fully in the pocket before resuming operation. Do not exceed the recommended depth of cut for the grade and geometry in use.