Accupro 54054416 Apkt Milling Insert Solid Carbide ACS35M

Product Description

The ACCUPRO 54054416 is a solid carbide milling insert in the APKT style, designed for use in indexable milling cutters across light to medium machining applications. This single-sided, right-hand insert carries the manufacturer grade ACS35M with a CVD coating and a positive rake geometry that reduces cutting forces and supports cleaner chip evacuation. With a corner radius of 0.0197 inches (0.50 mm) and a maximum depth of cut of 0.3937 inches (10.00 mm), it suits precision face milling and shoulder milling work. It is installed by machinists and toolroom technicians using standard screw-clamp toolholders.

This insert fits applications where consistent surface finish and controlled chip load are priorities, including mold work, die machining, and general production milling on ferrous and non-ferrous materials. The APKT style and CI series designation make it a direct fit for compatible APKT-style cutter bodies. The ISO code APKT1003PDERSCM identifies the geometry for cross-referencing with compatible tooling systems. Two cutting edges per insert extend tool life before indexing or replacement is required.

Key Features

• Solid carbide construction with CVD coating for wear resistance in milling operations
• Positive rake geometry reduces cutting forces and supports clean chip flow
• Corner radius of 0.0197 inches (0.50 mm) for controlled edge blending
• Maximum depth of cut of 0.3937 inches (10.00 mm)
• Two cutting edges per insert for extended usable tool life
• Screw-clamp insert holding method for secure seating in cutter body

Compatibility

Designed for use with APKT-style cutter bodies in the CI series. ISO code APKT1003PDERSCM can be used to verify fitment with compatible indexable milling cutter systems.

Installation Notes

This insert is installed by qualified machinists or toolroom technicians. Always power down and lock out the machine spindle before indexing or replacing inserts. Use the correct torx or hex key specified by the cutter body manufacturer to seat the crew clamp to proper engagement without over-torquing. Inspect the insert pocket and seating surface for chips or debris before installing a new insert to ensure proper seating and runout.