Accupro 14883480 Square End Mill 0.035 in 3 Flute Carbide

Product Description

The ACCUPRO 14883480 is a single-end square end mill designed for precision milling in metalworking and machining applications. Built from micrograin solid carbide and coated with AlTiN (Aluminum Titanium Nitride), this tool delivers consistent cutting performance and extended tool life in hardened and abrasive materials. It features a 0.035-inch cutting diameter, a 9/32-inch (0.280 inches) length of cut, a 30-degree helix angle, and a 1/8-inch shank diameter. The three right-hand spiral flutes and right-hand cutting direction make it well suited for finish milling slots, profiles, and contours in ferrous and high-temperature alloy workpieces.

This end mill is intended for use in CNC machining centers and manual mills where small-diameter precision cutting is required. The micrograin carbide substrate and AlTiN coating allow it to perform in dry or semi-dry cutting conditions at elevated temperatures. It is a practical choice for machinists, tool-and-die makers, and mold makers working with small-feature geometries. Center-cutting geometry enables direct plunging into the workpiece where required.

Key Features

• Micrograin solid carbide construction for rigidity and wear resistance in small-diameter tooling
• AlTiN coating extends tool life in high-temperature and abrasive cutting environments
• 30-degree helix angle promotes smooth chip evacuation and reduces cutting forces
• Center-cutting design allows plunge entry into the workpiece
• Right-hand cut, right-hand flute spiral for standard CNC and manual mill setups
• Single-end configuration with 1/8-inch shank for compatibility with standard collet holders

Compatibility

Designed for use in CNC machining centers and manual milling machines equipped with standard 1/8-inch collet or end mill holder systems. Part of the ACCUPRO ASQSC3-AT-CC-30H series of AlTiN-coated solid carbide square end mills.

Installation Notes

Installation is performed by qualified machinists. Ensure the spindle is fully stopped and the machine is powered down before changing tooling. Seat the 1/8-inch shank fully and evenly in the collet or end mill holder and torque the retention hardware according to the holder manufacturer specification. Inspect the cutting edges for chips or wear before each use, particularly at this diameter where tool deflection and breakage risk are elevated.