Accupro 14797181 Square End Mill 1mm 3 Flute Solid Carbide

Product Description

The ACCUPRO 14797181 is a solid carbide square end mill designed for precision milling in metalworking and machining applications. It features a 1 mm (0.0394 inches) cutting diameter with three right-hand spiral flutes and a 30-degree helix angle, producing clean, accurate cuts in a range of workpiece materials. The micrograin carbide construction provides hardness and edge retention suited to high-speed operations. With a length of cut of 0.059 inches and an overall length of 2.5 inches, this single-end tool is configured for tight-tolerance work in small-bore and fine-feature milling. It is centercutting, allowing plunge entry into the workpiece.

This end mill is suited to CNC machining centers and manual milling machines where small-diameter, fine-detail work is required. The extended reach configuration and 0.203-inch reach length make it useful for accessing recessed features or stepped pockets. The bright uncoated finish is appropriate for general-purpose milling where coating is not required. Machinists working in job shops, toolrooms, and production environments will find this tool applicable to ferrous and non-ferrous material removal at small scales.

Key Features

• 1 mm (0.0394 inches) cutting diameter for fine-detail milling work
• Three right-hand spiral flutes with 30-degree helix angle for efficient chip evacuation
• Micrograin solid carbide construction for hardness and edge retention
• Centercutting design allows direct plunge entry into the workpiece
• Extended reach with 0.203-inch reach length for recessed feature access
• Bright uncoated finish suitable for general-purpose milling applications

Compatibility

Designed for use in CNC machining centers and manual milling machines accepting a 0.125-inch (1/8 inch) shank diameter with standard collet or end mill holder tooling.

Installation Notes

Installation and tool changes should be performed by a qualified machinist with the spindle fully stopped and the machine in a locked-out state per OSHA lockout/tagout procedures. Ensure the collet or tool holder is clean and free of debris before seating the shank. Confirm runout with a dial indicator before beginning a cut, as small-diameter carbide tooling is sensitive to misalignment. Do not exceed the tool manufacturer's recommended feed and speed parameters for the workpiece material.