Accupro 14797000 Square End Mill 0.032in 2 Flute Carbide

Product Description

The ACCUPRO 14797000 is a solid carbide square end mill designed for precision milling of ferrous and non-ferrous materials in machining centers and CNC mills. It features a 0.032-inch cutting diameter, a 0.048-inch length of cut, and a 30-degree right-hand helix with two flutes. The micrograin carbide substrate provides the hardness and rigidity needed for tight-tolerance work at small diameters. The bright, uncoated finish suits applications where a coating is not required or where the user will apply a custom coating. This tool is installed and operated by machinists, tool-and-die makers, and CNC technicians.

This end mill is suited for stub-length milling operations where minimal overhang and maximum rigidity are priorities. The 0.032-inch diameter and short length of cut make it well-matched for fine-feature slotting, profiling, and pocket milling in small or intricate workpieces. It accepts a 1/8-inch collet or end mill holder and runs in both vertical and horizontal machining setups. The right-hand cut and right-hand flute direction are standard for conventional CNC milling operations.

Key Features

• 0.032-inch cutting diameter with a mill diameter tolerance of +0.0000 / -0.0010 inches for consistent cut accuracy
• 2-flute, right-hand spiral design promotes chip evacuation in slotting and profiling passes
• 30-degree helix angle balances cutting force and finish quality at small diameters
• Micrograin solid carbide construction for hardness and edge retention
• Centercutting geometry allows plunge entry into the workpiece
• Bright/uncoated finish — suitable for direct use or as a base for custom coatings

Compatibility

Designed as an OEM-style solid carbide square end mill compatible with standard 1/8-inch collet holders and end mill chucks used in CNC machining centers and manual mills.

Installation Notes

Install this end mill in a 1/8-inch precision collet or end mill holder rated for the intended spindle RPM and cutting forces at small diameters. Ensure the machine spindle is fully stopped and power is off before changing tooling. Follow your facility's toolholding torque and runout standards — excessive runout is especially damaging at diameters under 1/16 inch. Consult manufacturer feeds-and-speeds data for micrograin carbide at this diameter before first use.