Accupro 12180624 Corner Radius End Mill 3/4 in 4 Flute

Product Description

The ACCUPRO 12180624 is a solid carbide corner radius end mill designed for precision milling in demanding machining environments. With a 3/4 inch diameter, a 0.0300 inch corner radius, and an AlTiN coating, this tool handles high-heat applications where tool life and edge integrity are critical. The 4-flute, right-hand spiral geometry provides efficient chip evacuation and a smooth finish on ferrous and hardened materials. A 40-degree helix angle reduces cutting forces and improves surface finish at higher feed rates. Machinists and CNC operators in job shops, tool rooms, and production environments rely on this end mill for profile milling, slotting, and contouring.

This end mill suits steel, stainless steel, cast iron, and hard alloys typically encountered in aerospace, die-and-mold, and general precision machining. The centercutting design allows plunge entry, and the single-end configuration keeps the tool mass low for reduced runout on longer setups. The 2.5 inch length of cut supports deep-pocket work without sacrificing rigidity. Variable index flute spacing minimizes chatter at elevated spindle speeds, making it a practical choice for high-speed machining centers.

Key Features

• Solid micrograin carbide substrate for high wear resistance in hardened and abrasive materials
• AlTiN coating extends tool life in dry and semi-dry high-temperature cutting conditions
• 40-degree helix angle reduces radial cutting forces and improves surface finish
• Variable index flute spacing suppresses chatter at aggressive feed and speed combinations
• Centercutting design allows direct plunge milling without a pre-drilled pilot hole
• Corner radius of 0.0300 inches reduces stress concentration at the cutting edge and extends tool life on profiling passes

Compatibility

Designed as an OEM-style replacement or direct-use solid carbide corner radius end mill compatible with standard 3/4 inch collet chucks, end mill holders, and shrink-fit tooling systems on CNC machining centers.

Installation Notes

Installation and tool changes must be performed by a qualified machinist with the spindle fully stopped and the machine in an e-stop or locked-out state. Use a calibrated tool holder and check runout with a dial indicator before committing to a production cut. Do not exceed the tool manufacturer's recommended speeds and feeds for the workpiece material and coating type. Verify shank seating depth in the holder meets minimum engagement requirements per the holder manufacturer's specifications.