Accuform Manufacturing PTP221 Tough-mark Message Strip Red

Product Description

The ACCUFORM MANUFACTURING PTP221 is a heavy-duty adhesive floor marking strip designed to communicate safety messages and demarcate work zones, walkways, and entrances in industrial and commercial facilities. Built from 45-mil poly plastic with an aggressive adhesive backing, the strip measures 3 inches wide by 48 inches long and just 0.055 inches thick. Bold, repeating graphics printed along the full length deliver a clear Red Tag Area designation at a glance. Beveled edges resist tearing and lifting caused by foot traffic and pallet dragging, keeping the marking intact longer in high-traffic environments. Facilities managers, safety coordinators, and trade professionals apply these strips as part of lean and 5S workplace organization programs.

The PTP221 is suited for use in manufacturing plants, warehouses, distribution centers, and commercial job sites where floor-level visual communication is required. It bonds to clean, sealed, and non-coated surfaces including concrete, tile, and sealed wood. Each 48-inch strip can be trimmed to a custom length or cut at angles to form corners, making it practical for marking irregular areas, doorways, and aisle intersections. It is especially well-suited for the Set in Order phase of 5S implementation, where clear zone identification is a core requirement.

Key Features

• 45-mil poly plastic construction for durability in heavy-traffic areas
• Aggressive adhesive backing bonds to clean, sealed, and non-coated surfaces
• Beveled edges reduce tearing and lifting from pallet and foot traffic
• Repeating Red Tag Area graphics printed along the full 48-inch length
• Trimmable to custom lengths or angles for corners and irregular layouts
• Removes cleanly in one piece without leaving difficult residue

Compatibility

Designed for use on clean, sealed, and non-coated hard floor surfaces including concrete, ceramic tile, and sealed wood in indoor industrial and commercial environments.

Installation Notes

Surface must be clean, dry, and free of dust, oil, and loose coatings before application. Press firmly along the full length of the strip to ensure full adhesive contact. A roller or firm straight edge improves bond on textured surfaces. Follow applicable facility safety marking standards such as ANSI Z535 or OSHA 29 CFR 1910.22 when laying out walkway and work zone boundaries.