3M 7100069366 Low Odor Acrylic Adhesive DP810NS Tan 400 Ml

Product Description

The 3M 7100069366 is a two-part, toughened acrylic adhesive — sold under the Scotch-Weld DP810NS designation — formulated for structural bonding applications where low odor and non-sag performance are required. It uses a 1:1 mix ratio and delivers a 10-minute work life with handling strength reached in approximately 10 minutes. Compared to standard MMA acrylic adhesives, this product produces significantly less odor during application, making it better suited for enclosed or poorly ventilated work areas. It provides excellent shear and peel strength alongside good impact resistance and long-term durability.

This adhesive is designed for trade and industrial use cases where a fast-setting, structural bond is needed on vertical or overhead surfaces — the non-sag formulation keeps the mixed adhesive in place before cure. Typical applications include bonding metals, composites, and plastics in fabrication, assembly, and repair scenarios. Dispensing requires a 3M Scotch-Weld EPX 400 mL applicator and compatible mix nozzles, which are not included with the cartridge. The product is sold as individual 400 mL dual-cartridge units.

Key Features

• Two-part acrylic formula with 1:1 mix ratio for straightforward dispensing
• 10-minute work life and approximately 10-minute handling strength for fast turnaround
• Non-sag formulation suitable for vertical and overhead bonding applications
• Lower odor profile than standard MMA acrylic adhesives
• Excellent shear and peel strength with good impact resistance
• Requires 3M Scotch-Weld EPX 400 mL applicator and mix nozzles (sold separately)

Compatibility

Designed for use with the 3M Scotch-Weld EPX 400 mL dispensing applicator system and compatible 400 mL mix nozzles. Suitable for bonding a range of substrates including metals, composites, and plastics in structural assembly and repair applications.

Installation Notes

Surface preparation is critical — clean and degrease all bonding surfaces before application. Dispense using the appropriate EPX applicator and attach a fresh mix nozzle; purge a small amount before applying to the workpiece. Work in an area with adequate ventilation even though this product has reduced odor compared to standard MMA adhesives. Allow full cure time before applying load to the bonded assembly.

Technical Specifications

• Mix Ratio: 1:1
• Work Life: 10 minutes
• Handling Strength: Approximately 10 minutes
• Volume: 400 mL
• Color: Tan
• Weight: 1.42 pounds
• Unit of Measure: Each
• UPC: 00021200490835

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7100069366