3M 7100030068 Sealing Tape 4 Inch Tan Acrylic

Product Description

The 3M 7100030068 is a sealing tape built for difficult-to-adhere surfaces in construction, mechanical, and weatherization applications. The tape features a translucent, thin, conformable film backing with a high-tack acrylic adhesive supplied on a split release liner. The adhesive maintains a strong bond at both low and high application temperatures without melting or staining. At 4 inches wide, it covers seams, joints, and transitions effectively. Installers in HVAC, building envelope, and plumbing rough-in work rely on this tape where conventional products fail on damp or contaminated substrates.

This sealing tape is suited for residential and commercial construction where air barriers and moisture barriers are required at wall assemblies, penetrations, and flashing transitions. The waterproof membrane backing creates a continuous moisture barrier, and the tape also functions as an air barrier. The conformable backing allows it to wrap corners and irregular surfaces without bridging. UV resistance for up to 12 months makes it appropriate for applications with temporary weather exposure during the construction phase.

Key Features

• High-tack acrylic adhesive bonds to damp and difficult-to-stick surfaces
• UV-resistant for up to 12 months of temporary weather exposure
• Waterproof membrane backing provides both a moisture barrier and an air barrier
• Adhesive does not melt or stain under elevated temperatures
• Tough film backing resists punctures and tears during application
• Thin, conformable backing fits into corners and around irregular geometry
• Split release liner allows fast, accurate positioning without fumbling

Compatibility

Designed for use on building envelope assemblies, HVAC ductwork seams, flashing transitions, and other construction substrates where standard tapes fail to adhere, including damp or low-energy surfaces.

Installation Notes

Installation is typically performed by sheet metal workers, insulation contractors, or building envelope specialists following project specifications and local energy code requirements. Surface should be as clean and dry as conditions allow for best adhesion, though this tape is engineered to perform on damp substrates when dry prep is not possible. Apply firm, even pressure across the full tape width to ensure full adhesive contact. Avoid stretching the tape during application, which can cause edge lifting over time.

Technical Specifications

• Width: 4 inches
• UV Resistance: Up to 12 months
• Adhesive Type: High-tack acrylic
• Backing: Proprietary conformable film
• Release Liner: Split liner
• Color: Tan
• Unit of Measure: Roll
• Weight: 2.45 pounds
• Minimum Order Quantity: 12
• UPC: 00051111928738

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7100030068