3M 7010368554 Non-woven Abrasive Disc 12 Inch Fine

Product Description

The 3M 7010368554 is a non-woven abrasive disc engineered for light-duty blending, cleaning, deburring, and finishing on a variety of metal surfaces. Built on a tough nylon web construction with aluminum oxide mineral, this disc delivers a fine-grade cut that removes surface contaminants and burrs without excessive material removal. Rated to 1800 RPM, it is suited for use with right-angle grinders and disc polishers in industrial maintenance, fabrication shops, and metal finishing operations. At 12 inches in diameter, it covers broad surface areas efficiently, reducing cycle time on large workpieces.

This disc is a fit for light industrial applications where controlled surface preparation is required. Typical use cases include cleaning mill scale and oxidation, deburring cut edges, blending weld seams, and conditioning metal surfaces before coating or inspection. The open nylon web structure resists loading, making it effective on soft metals and coated surfaces where conventional abrasive discs tend to clog and glaze. It performs well on steel, aluminum, stainless steel, and other common shop metals.

Key Features

• Aluminum oxide mineral provides consistent fine-grade cut for light blending and surface conditioning
• Open nylon web resists loading and debris buildup, extending disc service life
• Flexible and pliable construction conforms to irregular or contoured surfaces
• Rated to 1800 RPM for compatibility with standard disc grinders and polishers
• 12-inch diameter delivers broad surface coverage per pass
• Maroon color designation identifies fine-grade classification at a glance

Compatibility

Designed as a general-purpose non-woven abrasive disc for use with compatible 12-inch disc grinders, polishers, and right-angle machines rated at or below 1800 RPM. Suitable for use on steel, aluminum, stainless steel, and other common metals in light industrial and fabrication settings.

Installation Notes

Installation and disc changes should be performed with the machine fully powered off and unplugged or locked out per facility lockout/tagout procedures. Verify that the mounting arbor and backing pad are rated for the disc diameter and RPM before use. Inspect the disc for damage before each use and do not exceed the 1800 RPM speed rating. Personal protective equipment including eye protection and gloves is required during operation.