3M 7010364880 Scotch-brite Cs-dc 8 Inch Abrasive Disc

Product Description

The 3M 7010364880 is a Scotch-Brite CS-DC Clean and Strip disc built for aggressive surface preparation in metalworking environments. The disc uses an extra coarse (XCS) silicon carbide abrasive bonded to a non-woven web construction. That combination delivers sharp, fast cutting action while resisting loading and heat buildup. At 8 inches in diameter, it covers a wide surface area and still reaches into tighter geometry than a wire brush. It is used by fabricators, welders, and metal finishing technicians who need to strip paint, rust, scale, or coatings without altering the base metal profile.

This disc is suited for paint prep, coating removal, corrosion stripping, and general surface conditioning on metal workpieces. The non-woven construction wears uniformly across the life of the disc, so cut rate and finish consistency stay predictable from first use to last. The thin disc profile allows access to corners and contoured areas that flat grinding wheels cannot reach. Typical applications include pre-weld cleaning, pre-paint surface prep, and removal of mill scale or light oxidation in fabrication and maintenance settings.

Key Features

• Extra coarse (XCS) silicon carbide grain for aggressive material removal
• Non-woven web construction resists smearing and provides uniform wear
• Load and heat resistance supports extended operation and consistent results
• Removes paint, rust, and coatings without distorting workpiece geometry
• Thin disc profile accesses tight corners and contoured surfaces
• Greater surface coverage compared to wire brush alternatives

Compatibility

Designed for use with angle grinders and disc tools that accept 8 inch non-woven Clean and Strip discs. Confirm arbor size and tool RPM rating before installation.

Installation Notes

Installation and use of abrasive discs should follow ANSI B7.1 safety standards for grinding wheels and abrasive products. Disconnect and de-energize the grinder before mounting or removing the disc. Verify that the tool RPM rating meets or exceeds the disc maximum rated speed before operating. Wear appropriate PPE including eye protection and gloves during use.

Technical Specifications

• Disc Diameter: 8 inches
• Abrasive Material: Silicon Carbide
• Grade: Extra Coarse (XCS)
• Construction: Non-Woven Web
• Weight: 0.36 pounds
• Package Dimensions: 9.6 x 9.5 x 11.6 inches
• Sold As: Each
• UPC: 00048011009582

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7010364880