3M 7010329105 Scotch-brite Deburring Wheel 6 Inch Fine

Product Description

The 3M 7010329105 is a convolute non-woven deburring wheel from the Scotch-Brite line, built for removing sharp burrs and radiusing edges on stainless steel, titanium, and other demanding alloys. The higher-density convolute construction maintains conformability under load, allowing the wheel to follow intricate shapes, contours, and complex geometries without gouging or undercutting. Aluminum oxide abrasive at a fine grit rating delivers controlled material removal with a consistent surface finish. This wheel is typically installed by machinists, fabricators, and finishing technicians working with precision metalwork on bench grinders or arbor-mounted setups.

This wheel is suited for deburring and edge finishing operations on stainless steel, titanium, and other hard-to-finish alloys in both production shop and job-shop environments. The non-woven web construction resists loading, meaning the abrasive surface stays open and delivers fresh cutting action throughout the wheel's life. It is well matched to finishing intricate part geometries where a rigid abrasive wheel would bridge over fine features or leave unacceptable surface conditions. Typical applications include aerospace component finishing, precision fabrication, and general metalworking deburring operations.

Key Features

• Higher-density convolute construction retains conformability for intricate contours and complex geometries
• Non-woven web resists loading and continuously exposes fresh abrasive to the workpiece
• Aluminum oxide abrasive at fine grit for controlled burr removal and edge radiusing
• Effective on demanding alloys including stainless steel and titanium
• 6-inch diameter suitable for standard arbor-mounted grinder setups

Compatibility

Designed as an arbor-mounted convolute deburring wheel for use on bench grinders and finishing machines accepting 6-inch diameter non-woven convolute wheels.

Installation Notes

Installation and operation should be performed by qualified machinists or finishing technicians familiar with abrasive wheel safety. Always power down and lock out the grinder before mounting or removing the wheel. Verify that the machine's rated RPM meets or exceeds the wheel's maximum operating speed before use. Inspect the wheel for damage before each use and never operate a cracked or deformed wheel.

Technical Specifications

• Diameter: 6 inches
• Abrasive Material: Aluminum Oxide
• Grit Grade: Fine
• Wheel Type: Convolute Non-Woven Deburring
• Weight: 13.5 pounds
• Package Dimensions: 7.1 x 7.1 x 25.8 inches
• Unit of Measure: Each

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7010329105