3M 7010291183 Abrasive Cloth Belt 320 Grit 168x6 Inch

Product Description

The 3M 7010291183 is a silicon carbide abrasive cloth belt engineered for metal surface sanding and final cosmetic finishing, including the blue finish required on stainless steel. Built on a heavy YF-weight cloth backing with closed coat construction, this belt delivers aggressive cutting action alongside a fine surface finish. Cork particles are blended with the silicon carbide mineral to refine the finish at each pass. Resin bonding resists heat-related deterioration, extending belt service life. At 168 inches long and 6 inches wide with a 320 grit rating, it is suited for wide-format belt sanders used in fabrication and metal finishing environments.

This belt is designed for metal surface preparation and cosmetic polishing applications, particularly where a controlled fine finish is required on stainless steel and other hard metals. The flexible cloth backing conforms to contoured and irregular workpiece profiles, making it practical for finishing work that involves curved or non-flat surfaces. The waterproof polyester construction allows debris and swarf to be cleared easily, maintaining consistent cut rate across the length of the belt. It is typically used by metal fabricators, surface finishing technicians, and maintenance professionals working with large belt sanding equipment.

Key Features

• Silicon carbide abrasive with cork particles delivers aggressive cut and refined finish
• Heavy YF-weight cloth backing provides durability under continuous sanding loads
• Closed coat construction increases grain density for finer results on hard surfaces
• Resin bond resists heat buildup, extending operational belt life
• Flexible backing conforms to contoured parts for consistent surface contact
• Waterproof polyester material simplifies debris removal during and after use

Compatibility

Designed for use on wide-format belt sanding machines accepting 168-inch by 6-inch abrasive cloth belts, commonly used in metal fabrication and surface finishing applications.

Installation Notes

Belt installation should be performed by a qualified operator following the equipment manufacturer's guidelines for belt tensioning and tracking. Ensure the sanding machine is fully powered off and locked out before mounting or removing the belt. Confirm belt travel direction arrows align with the machine drive direction prior to operation. Inspect the belt for tears or edge damage before each use.

Technical Specifications

• Abrasive Mineral: Silicon Carbide with Cork Particles
• Grit: 320
• Belt Length: 168 inches
• Belt Width: 6 inches
• Backing Weight: YF-weight cloth
• Coat Type: Closed Coat
• Bond Type: Resin
• Backing Material: Waterproof Polyester
• Weight: 1.91 pounds
• Unit of Measure: Each
• Minimum Order Quantity: 20
• UPC: 00051144740611

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7010291183